Digilent chipKIT Uno32 Referans Kılavuzu - Sayfa 6

Mikrodenetleyiciler Digilent chipKIT Uno32 için çevrimiçi göz atın veya pdf Referans Kılavuzu indirin. Digilent chipKIT Uno32 18 sayfaları.

Sayfayı Yazdır
chipKIT Uno32 Reference Manual
SPI SELECT: Used to configure the chipKIT as either a Master or Slave when
JP5/JP7
using the SPI. The chipKIT board can be connected to another device or even
another chipKIT through the SPI connector (J8).
chipKIT configured as an SPI Master
chipKIT configured as an SPI Slave
For more information on SPI, please visit Wikipedia's SPI page:
http://en.wikipedia.org/wiki/Serial_Peripheral_Interface_Bus#Mode_Numbers
2
JP6/JP8
I
C/ANALOG PIN SELECT: Used to configure A4 and A5 for functionality as an
Analog input or to be used as I
A4 and A5 on J7 are configured to
For more information on I
http://en.wikipedia.org/wiki/I2C
www.digilentinc.com
Copyright Digilent, Inc. All rights reserved. Other product and company names mentioned may be trademarks of their respective owners.
be used as analog inputs
2
C, please visit Wikipedia's I
2
C communication pins.
A4 and A5 are configured to be used as
2
I
C communication lines (A4 – SDA, A5 –
SCL )
2
C page at:
page 6 of 17