FIAM. SAHARA 4123 Ürün Bilgileri - Sayfa 8

İç Mekan Mobilyaları FIAM. SAHARA 4123 için çevrimiçi göz atın veya pdf Ürün Bilgileri indirin. FIAM. SAHARA 4123 17 sayfaları.

Safety instructions

• Intended Use

Once removed from its original packaging, the SAHARA Table must be placed on a perfectly flat surface.

All the SAHARA Table's supporting bases must be resting firmly on the surfaces on which it is placed; otherwise, the SAHARA

Table may lose stability, making it hazardously unstable. Weights, objects and loads must be evenly distributed across the surfaces

of the SAHARA Table and well balanced in order to ensure stability and safety. Unevenly placed or unbalanced weights, objects

and loads on the surfaces of the SAHARA Table may reduce its stability and thus its safety.

Sharp items or anything which may damage the glass (such as chemical products containing hydrofluoric acid) should not be

placed on the surface of the SAHARA Table. If objects of this kind are placed on the surface of the SAHARA Table in spite of this

warning, you are urged to take adequate precautions to prevent damage to the float glass.

When placing sharp objects on the surface of the SAHARA Table, a mat of insulating material (such as rubber, cork, plastic or

leather) thick enough to dampen any impacts should be placed between the float glass surface and the sharp objects. Never place

items which may damage the float glass (such as chemical products containing hydrofluoric acid) on the surface.

• Warnings - Incorrect use and Non-recommended use

Below, we provide a series of warnings and examples of incorrect uses or procedures which reduce the safety of the SAHARA

Table.

The series of warnings and incorrect uses or procedures provided below is purely guideline and does not cover all the possible

circumstances for incorrect or non-recommended uses of the SAHARA Table, which must be evaluated on each occasion.

Do not sit or stand upon the float glass surface of the SAHARA Table.

Do not use the float glass surface of the SAHARA Table as a chopping surface.

Do not strike the SAHARA Table with hammers or pointed items which may crack or shatter the glass.

Do not use powder detergents or detergents containing abrasives for cleaning the SAHARA Table, since they may damage the

float glass.

Do not use the SAHARA Table for DIY work or for mechanical, electrical or electronic repairs.

In normal conditions of use, do not tilt the product by more than 10°. Any higher angles might reduce the stability of the SAHARA

Table.

Never place items at temperatures below -30°C (such as items just taken out of the freezer), or with temperatures above +30°C

(such as foods just removed from the oven) on the SAHARA Table; exposing the surface to stresses of this kind may damage the

glass, reducing its strength and thus its safety level.

Never expose the SAHARA Table to intense heat sources (such as stoves or ovens); exposing the table to stresses of this kind

may damage the float glass, reducing its strength and thus its safety level. Do not expose the SAHARA Table to temperatures

below -10°C or weather; exposure of this kind may damage the glass, reducing its strength and thus its safety level. The SAHARA

Table should be placed well away from items such as coat racks or ornaments which may accidentally fall onto its surface.

• Moving the Table

To ensure that the SAHARA Table is moved in the conditions of the utmost safety, we urge you to comply with the instructions

provided below:

The Table must always be handled by at least two people, wearing gloves which assure a good grip on the float glass.