Digilin Lagoon Kurulum Kılavuzu - Sayfa 2
Dış Mekan Işığı Digilin Lagoon için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. Digilin Lagoon 3 sayfaları. Pool, pond & garden fixture
Sayfayı YazdırLagoon - Pool, Pond & Garden Fixture
Installation Guide
Installation
1.
Orientate the fitting on the mounting
surface so that the desired mounting
surface can be illuminated. Note that
the fitting can tilt but not rotate. Mark
the mounting holes.
4.
Run continuous cable from luminaire back to
dry location to make any joins and connect
to power supply/further fittings.
If insufficient cable has been ordered with
the luminaire, a waterproof cable join, using
an approved waterproof cable joining kit in
accordance with Wiring Regulations must
be undertaken.
Note: Drivers should not be covered. Drivers rely on convection air flow for cooling and covering them may cause them to enter thermal regulation.
For any technical information relating to the connection of these luminaires to dimming systems, refer to LED products at
digilin.com.au
+617 3899 1267
2.
Remove the fittings and drill the mounting
holes.
5.
Turn on power.
3.
Secure the fitting to the mounting surface
using suitable fasteners.
6.
Adjust fitting tilt to desired angle.
www.digilin.com.au
Page 2 of 3