Digilock Next Mech Dial Combo Ürün Kılavuzu - Sayfa 2
Kilitler Digilock Next Mech Dial Combo için çevrimiçi göz atın veya pdf Ürün Kılavuzu indirin. Digilock Next Mech Dial Combo 3 sayfaları.
Sayfayı Yazdır
Mounting
Screws
Reset Combination
1
Note "M" on
Manager Key
Manager key
Removal key
Factory default combination 0-0-0-0
After opening the door with the Manager Key,
leave the door open and use the Manager
Key to turn the knob to the "Locked"
position. Remove the Manager Key.
4
The final code displayed is the current
code. In this example, the combination was
.
5-9-9-4
Product Guide
2
Reset Tool
Insert the Reset Tool into the four pin holes
on the rear of the unit.
5
Remove the Reset Tool and turn the knob
to the unlocked
position.
The Dial Combo has been reset and is
ready for use.
Dial Combo
Shared Use
3
Spacer Requirements
Door thickness
Screw type
*Spacer required
0 – 5 mm
M3×10
5 – 8 mm
M3×14
8 – 12 mm
M3×10
12 – 16 mm
M3×14
16 – 20 mm
M3×18
Push in the Reset Tool and simultaneously
turn all dials until they stop.
✓
✓