Digilock NEXT Sola3 Keypad Ürün Kılavuzu - Sayfa 5
Kilitler Digilock NEXT Sola3 Keypad için çevrimiçi göz atın veya pdf Ürün Kılavuzu indirin. Digilock NEXT Sola3 Keypad 5 sayfaları. Key managed
Ayrıca Digilock NEXT Sola3 Keypad için: Ürün Kılavuzu (9 sayfalar)
Sayfayı Yazdır
Support
Sleep Mode
After three consecutive incorrect User Code entries to unlock, the lock will enter Sleep Mode for one minute. For each subsequent incorrect
entry, the lock will remain in Sleep Mode for an additional minute. The keypad is disabled while in Sleep Mode.
Low Battery Indicator
After locking or unlocking, the lock emits two sets of three beeps indicating that the batteries are low. Replace the batteries.
Does not Unlock with the User Code
The lock does not recognize the User Code. For immediate access, operate with the Manager Code. If in assigned use functionality, follow
instructions to Assign the User Code to assign a new User Code to the lock.
Does not Operate with the Manager Code
The lock does not recognize the Manager Code. Follow instructions to Assign Manager Code to program the Manager Code to the lock.
For immediate access, operate with the Owner Code.
Does not Operate with the Owner Code
The lock does not recognize the Owner Code. Contact Digilock Support.
No Audible Feedback when = is Pressed
The lock may be in Sleep Mode or the batteries may need to be replaced. For immediate access, operate with a Power Key.
Battery Replacement
1
Remove the 2 battery cover
plate screws.
Loosen the battery cover by inserting
a small fl at-head in either the top or
bottom notches of the cover plate.
051418
PG-NLS3/P-K-CT/P-DEN
Product Guide
2
Pull the battery pack from the
front housing.
Keypad
Code Managed
Shared & Assigned Use Functionality
It is not necessary to uninstall the lock from the door.
3
Remove batteries and replace
with two premium lithium
CR2450 batteries.
4
Re-Insert the battery pack and
screw cover plate in place.
Phone: 707 766 6000
www.digilock.com | [email protected]