Cres Cor RO151037 Kurulum, Kullanım ve Bakım Kılavuzu - Sayfa 5
Fırın Cres Cor RO151037 için çevrimiçi göz atın veya pdf Kurulum, Kullanım ve Bakım Kılavuzu indirin. Cres Cor RO151037 12 sayfaları. 2kw rethermalizer
Sayfayı Yazdır5925 Heisley Road • Mentor, OH 44060-1833
COOKING WITH PRE-SET RECIPES:
1 . Push Orange Power On button . Left side of control
panel . Display will read "LOtPr" and the Retherm
unit will be in HOLD mode .
2 . Push the "RECIPE" button to select Preset Recipe
process. Button will flash.
3 . Turn the SET knob to select a recipe as: "rcP01" or
"rcP02" or "rcP03" or "rcP04" or "rcP05" . Push the
SET knob to select and start the preset process .
Unit will display "PrEHt" .
4 . Control will next flash "PUSH StArt" and alarm
sounds . Load foods into the oven and close doors .
5 . Push the "START" button to start the Retherm/Cook
process . Display will change between the set COOK
temperature and the countdown of the timer as pre-
programmed .
6 . When timer reaches display of "00:00", it will change
between the set HOLD temperature and a count-up
running time . Alarm will sound . Retherm unit will
display how long foods have been on hold .
COOKING WITH TIME AND TEMPERATURE:
1 . Push Orange Power On button . Left side of control
panel . Display will read "LOtPr" and the Retherm
unit will be in the HOLD mode .
2 . Push "COOK" button on display panel to program a
Retherm temperature. Button will flash.
3 . Turn the set knob to the required temperature . Push
the set knob to accept the temperature setting .
4 . Display will move to the "HOLD" button . Button will
flash until programmed.
Call Toll-free: 877-CRES COR (273-7267) • Fax: 800-822-0393 • www.crescor.com
OPERATING INSTRUCTIONS (continued)
Rethermalizer
Rev. 1 (1/16)
5 . Turn the set knob to the required temperature . Push the
set knob to accept the temperature setting .
6 . Display will automatically move to the "TIME" button
(if no food probe is plugged into the probe jack) .
7 . Turn the set knob to the required time . Push the set
knob to accept the time setting .
8 . Control will go to "PrEHt" and start heating to the set
COOK temperature .
9 . Control will next flash "PUSH StArt" and alarm
sounds . Load foods into the oven and close door .
10 . Push the "START" button to begin the Retherm/Cook
process . Display will change between the set COOK
temperature and the countdown of the timer .
11 . When timer reaches display of "00:00", it will change
between the set HOLD temperature and a count-up
running time . Alarm will sound . Unit will display how
long foods have been on hold .
FL-CO151027
Page 5 of 12