Cresco 20 Manuel - Sayfa 4

Serpme Cresco 20 için çevrimiçi göz atın veya pdf Manuel indirin. Cresco 20 18 sayfaları. Fertilizer and salt spreader

Assembling your Cresco 20

ASSEMBLING THE SLIDE SYSTEM, LOWER FRAME AND STAND:

You will need a phillips head screwdriver, one

pair of plyers/grips and an M6 metric spanner.

If you are using the spreader for fertiliser or

seed, slide the summer application into position

as shown above.

Locate the lower linkage (22) and place it

through the pivot bracket (21).

#22

If you are using the spreader for winter, slide the

winter application into position as shown above.

Locate & tighten the 4 screws & washers to fix

the required slider (winter or summer) into po-

sition. Make sure the screws are not overly tight

and the slider can slide backward and forward.

Push the free end of the lower linkage (22)

through the centre hole of the chosen slider.

Winter Slider