Diginet LEDsmart+ MultiMate MMTM/PB Kurulum Kılavuzu - Sayfa 3
Anahtar Diginet LEDsmart+ MultiMate MMTM/PB için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. Diginet LEDsmart+ MultiMate MMTM/PB 15 sayfaları. Push button minute timer
Sayfayı Yazdır
A1: Timer has been powered up via mains 240Vac for LESS THAN 15 MINUTES
Step 1
Press and hold the button for 10 seconds
Note: Connected lights will dim up or down, this is normal
Step 2
The white LED Indicators will blink ON/OFF twice per second. This indicates that
the timer is now in Setup Mode
Note: If more than one LEDsmart
timers will now enter setup mode. The blink ON/OFF will also be seen on all
other LEDsmart
Step 3
The timer is ready for the settings to be adjusted as required. Go to the relevant
setup function instructions
A2: Timer has been powered up via mains 240Vac for MORE THAN 15 MINUTES
Step 1
Press and hold the button for 30 seconds
Note: This resets the Setup Entry time back to 10 seconds (for the next 30
minutes)
Note: Connected lights will dim up or down, this is normal
Step 2
The white LED Indicators will blink ON/OFF twice per second. This indicates that
the timer is now in Setup Mode
Note: If more than one LEDsmart
timers will now enter setup mode. The blink ON/OFF will also be seen on all
other LEDsmart
Step 3
The timer is ready for the settings to be adjusted as required. Go to the relevant
setup function instructions
+
minute timer is connected in parallel, all these
+
minute timers connected in parallel
+
minute timer is connected in parallel, all these
+
minute timers connected in parallel
Push Button Minute Timer
3