Cisco 1503 Yazılım Kılavuzu - Sayfa 43

Anahtar Cisco 1503 için çevrimiçi göz atın veya pdf Yazılım Kılavuzu indirin. Cisco 1503 49 sayfaları. Cisco systems switch user manual

clear counters

Syntax:

clear counters {stack | hub [hub id] | port [hub id] [port id] }

Mode:

Administrator

Description:

Clears all accrued statistics for the specified stack, hub, or port, or a

combination of these.

Command Keyword Definitions

• stack—Clears statistics for all ports on all hubs in the stack.

• hub—Clears statistic for the specified hub. If no hub is specified, statistics

are cleared for all hubs in the stack.

• port—Clears statistics for the specified port on the specified hub. If no port

is specified, statistic are cleared for all ports in the stack.

• hub id—(Optional) Number used to identify the hub in a stack. An integer

between 1 and 5. Read the section "Hub ID Numbers" earlier in this chapter

for information about how to determine hub ID numbers.

• port id—(Optional) Port number that is shown on the rear panel of the hub.

A value from 1 to 8.

Statistics Commands

Using Your Hub Software 3-43