Cisco 200E Series Hızlı Başlangıç Kılavuzu - Sayfa 4

Anahtar Cisco 200E Series için çevrimiçi göz atın veya pdf Hızlı Başlangıç Kılavuzu indirin. Cisco 200E Series 13 sayfaları. Advanced smart switches

PoE is available on the following ports:

Model

SF200E-24P

SF200E-48P

Use the following table to determine the total power budget available for

all devices on your particular model of switch.

Model

SF200E-24P

SF200E-48P

Configuring the Cisco Small Business

Smart Switch

Before You Begin

Verify that a computer with Microsoft Internet Explorer (version 6 and

higher) or Firefox (version 2.0 or higher) is available.

The switch can be accessed and managed by two different methods; over

your IP network using the web-based interface, or by the CLI through the

console port. Using the console port requires advanced skills.

The switch works with Cisco Small Business network tools and services

including the Cisco FindIT Network Discovery Utility that enables you to

automatically discovers all supported Cisco Small Business devices in the

same local network segment as your PC. You can get a snapshot view of

each device or launch the product configuration utility to view and

configure the settings. For more information, see www.cisco.com/go/findit.

Accessing and Managing Your Switch Using the Web-

Based Interface

To access the switch with a web-based interface, you must know the IP

address the switch is using. The default configuration of the switch is to

use its factory default IP address of 192.168.1.254 until it has obtained an

IP address from a DHCP server.

Power Dedicated to PoE

100 Watts

180 Watts

Ports

1—6 and 13—18

1—12 and 25—36

200E Series Advanced Smart Switches