Accusplit Eagle AE170XL Kullanım Talimatları - Sayfa 4
Adımsayar Accusplit Eagle AE170XL için çevrimiçi göz atın veya pdf Kullanım Talimatları indirin. Accusplit Eagle AE170XL 4 sayfaları. Accusplit fitness electronics user manual
Sayfayı Yazdır
CHANGING UNITS (English vs. Metric)
The Pedometer can display either in English units (in, mi, and lb
- this is the default), or in Metric units (cm, km, and kg). From within
Deep Set mode (see pg. 21), press the S2 button to cycle back and
forth between setting the Step Filter set point and Choice of Unit
System. T he unit will show either "US" or "EU" (for European Union)
depending on the unit system chosen. If you change units after using
the pedometer, the unit will convert all of your data into the new unit
system when you exit Deep Set model. Y ou can check to see which
system of units you are using by seeing which measurement units
are displayed on the Stride and Weight setting screens.
Press S3+ (MODE) or S3– (RESET) to change the Measurement Mode.
Press and hold S4 for 2 seconds to exit Deep Set Mode.
Note: T he unit will save any changes and exit set mode after 30
24
seconds unattended.
To replace the battery:
1. Insert a coin into the slot on the
bottom of the case, and twist to
loosen the faceplate. Remove
faceplate and set aside.
2. Locate the battery holder as seen
on sketch. Pull out the old battery,
and push a new LR-44 battery into the holder,
with positive terminal (+) facing up.
3. Snap faceplate back into place, hooking the bottom
two tabs first, then closing by pressing together at the
top two tabs.
26
• Adjustable Weight setting for greater Calorie accuracy
(default setting is 100lbs/45 kg, but can be set from
66-400 lbs./30-180kg in 0.5 lb. / 0.5 kg increments.)
• Adjustable Step Filter (default setting is 1 step, but can
be set from 0-5 steps) to increase step count a ccuracy.
• Switchable between English and Metric units, without
losing data (default setting is English units).
28
30
REPLACING THE BATTERY AND MASTER RESET
When the display starts to dim or goes blank, it is time to
replace the battery.
If the display is not uniformly dim or blank, and appears to
display "erroneous data" , do a Master Reset by pressing all
3 buttons simultaneously for 3 seconds and then release.
The display should go blank, then turn all segments on, then
display 0 steps in Step Mode.
Note: All the settings will return to their default setting values.
If you need to change the battery, the settings will also revert
to default settings.
SPECIFICATIONS, FEATURES, and FUNCTIONS
Description of Functions
• Counts Steps up to 99,999 then rollover.
• Counts distance traveled during step activity, up to
999.99 mi or km, then rollover. Automatically counts
whenever step activity is occurring.
Battery
• Adjustable stride length for greater distance accuracy
(default setting is 21 in/53 cm, but can be set from 12-72 in
(30-180 cm), in 0.25 in / 1 cm increments.
• Counts Calories consumed during step activity, up to
9,999.9 Kcal, then rollover. Automatically counts
whenever step activity is occurring.
• Uses a proprietary formula for high accuracy in Calorie
computation.
REGISTER NOW
your AE170XL Registration to
the Repair Center address in the
warranty, and we will let you know
about future products.
NO-PROOF-OF-PURCHASE LIMITED WARRANTY
$12 fee for service thereafter. See label inside unit for date.
Battery, replacing . . . . 25-26
Current day's results,
viewing . . . . . . . . . . . . . .19
Setting Mode, exiting . . . .15
Open your pedometer . . . .4
Safety Leash . . . . . . . . 17-18
Setting up pedometer. . 8-15
Step Filter Setting,
change . . . . . . . . . . . 22-23
Please return
Email (preferred)
User
Free service for first year of ownership;
See www.ACCUSPLIT.com/support for details
INDEX
Stride Length,
setting . . . . . . . . . . . . 11-13
Unit of measure,
changing . . . . . . . . . . . . .24
Wearing pedometer . . . . .16
Weight, setting . . . . . . 14-15
Warranty . . . . . . . . . . . . . .29
25
27
29
31