Cisco 3020 - Cisco Catalyst Blade Switch Yayın Notu - Sayfa 22

Anahtar Cisco 3020 - Cisco Catalyst Blade Switch için çevrimiçi göz atın veya pdf Yayın Notu indirin. Cisco 3020 - Cisco Catalyst Blade Switch 27 sayfaları. Release notes for the cisco catalyst blade switch 3020 for hp, ciscoã‚â iosã‚â releaseã‚â 12.2(44)se
Ayrıca Cisco 3020 - Cisco Catalyst Blade Switch için: Başlangıç Kılavuzu (37 sayfalar), Başlangıç Kılavuzu (31 sayfalar), Quickspecs (12 sayfalar), Yayın Notu (41 sayfalar), Yayın Notu (23 sayfalar), Yayın Notu (21 sayfalar), Kurulum Kılavuzu (21 sayfalar)

Sayfayı Yazdır
Cisco 3020 - Cisco Catalyst Blade Switch Yayın Notu
Documentation Updates
Error Message VQPCLIENT-2-TOOMANY: Interface [chars] shutdown by active host limit.
Error Message VQPCLIENT-3-VLANNAME: Invalid VLAN [chars] in response.
Error Message WCCP-5-CACHEFOUND: Web Cache [IP_address] acquired.
Error Message WCCP-1-CACHELOST: Web Cache [IP_address] lost.
Deleted System Messages
Error Message ACLMGR-2-NOVMR: Cannot create VMR data structures for access list
[chars].
Error Message DOT1X-5-INVALID_INPUT: Dot1x Interface parameter is Invalid on
interface [chars].
Error Message DOT1X-5-SECURITY_VIOLATION: Security violation on interface [chars],
New MAC address [enet] is seen.
Error Message DOT1X_SWITCH-5-ERR_VLAN_NOT_FOUND: Attempt to assign non-existent or
shutdown VLAN [dec] to 802.1x port [chars]
Release Notes for the Cisco Catalyst Blade Switch 3020 for HP, Cisco IOS Release 12.2(50)SE and Later
22
The system has shut down the specified interface because too many hosts have requested
Explanation
access to that interface. [chars] is the interface name.
Recommended Action
To enable the interface, remove the excess hosts, and enter the no shutdown
interface configuration command.
The VLAN membership policy server (VMPS) has specified a VLAN name that is
Explanation
unknown to the switch. [chars] is the VLAN name.
Ensure that the VLAN exists on the switch. Verify the VMPS configuration by
Recommended Action
entering the show vmps privileged EXEC command.
The switch has acquired the specified web cache. [IP_address] is the web cache IP
Explanation
address.
No action is required.
Recommended Action
The switch has lost contact with the specified web cache. [IP_address] is the web cache
Explanation
IP address.
Verify the operation of the web cache by entering the show ip wccp web-cache
Recommended Action
privileged EXEC command.
OL-18274-02