Accusplit 980-312 Kullanım Talimatları - Sayfa 2

İzle Accusplit 980-312 için çevrimiçi göz atın veya pdf Kullanım Talimatları indirin. Accusplit 980-312 4 sayfaları. Accusplit stopwatch operating instructions

Sayfayı Yazdır

4-5

There are four buttons as

indicated in the illustration.

TIME/CALENDAR

display

STOPWATCH

display

6-7

3. S2 – Press "B" repeatedly to select the digits (ﬂ ashing) to be adjusted.

With each press of "B," the digits to be adjusted change over in the

following order.

seconds

minutes

hour

Note: The watch exits set mode automatically after setting date.

4. S3 – Press "A" to set the ﬂ ashing digits or reset the seconds to "00".

• The digits move quickly if "A" is kept pressed.

• When the seconds digits count any number from "30" to "59" and "A" is

pressed, one minute is added and the second digits are reset to "00".

5. S4 – After all the adjustments are completed, press "A" repeatedly until watch

exits set mode and returns to the TIME/CALENDAR display.

Notes:

1. Hour digits are displayed in the 24-hour indication.

2. Year digits can be set from 1988 to 2027. The calendar adjusts automatically for

odd and even months including February of leap years.

STROKE/FREQUENCY

MEASURING display

STROKE/FREQUENCY MEASURING MODE

year

month

date

TIME/CALENDAR SETTING

ACCUSPLIT products use a common setting procedure known as S1-S2-S3-S4.

S1 (2 sec) - Enter set function OR

S1 (4 sec) - Enter set function &

clear the current settings

S2 – Select ﬁ eld to be set

(selected ﬁ eld will ﬂ ash)

S3 – Set ﬁ eld to desired settings

S4 – Exit setting function

Hour

TIME/CALENDAR display mark

1. Press "D" to show the time/calendar display. The time/calendar display

mark will appear.

2. S1 – Press and hold "B" for 2 seconds until seconds display begins ﬂ ashing.

STOPWATCH

Press "D" in the TIME/CALENDAR display to show the STOPWATCH display.

The STOPWATCH display mark will appear.

The STOPWATCH can measure up to 10 hours in hours, minutes, seconds and

1/100 seconds.

• Before using the stopwatch be sure to reset the digits to "0:00:00.00".

When the stopwatch is stopped, press "B" to reset.

When the stopwatch is counting, press "A" to stop the measurement

and then press "B".

Split/lap number

STOPWATCH display mark

Year

Month and date

Seconds

Minutes

Split time

Lap time

Total time (accumulated

elapsed time)