Cisco 3560G-24PS - Catalyst Switch Veri Sayfası - Sayfa 9
Anahtar Cisco 3560G-24PS - Catalyst Switch için çevrimiçi göz atın veya pdf Veri Sayfası indirin. Cisco 3560G-24PS - Catalyst Switch 23 sayfaları. 10/100/1000 hardware configurations
Ayrıca Cisco 3560G-24PS - Catalyst Switch için: Ürün Bülteni (5 sayfalar), Ürün Destek Bülteni (6 sayfalar), Teknik Özellikler (3 sayfalar), Ürüne Genel Bakış (25 sayfalar), Teknik Özellikler (8 sayfalar), Broşür (8 sayfalar), Açıklama (1 sayfalar), Ürün Destek Bülteni (5 sayfalar)
Sayfayı Yazdır
© 2009 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.
Availability and Scalability
Superior Redundancy for
Fault Backup
High-Performance IP Routing
Integrated Cisco IOS Software
Features for Bandwidth
Optimization
● Cisco Uplink Fast and BackboneFast technologies help ensure quick failover recovery,
enhancing overall network stability and reliability.
● IEEE 802.1w Rapid Spanning Tree Protocol (RSTP) provides rapid spanning-tree
convergence independent of spanning-tree timers and the benefit of distributed
processing.
● Per-VLAN Rapid Spanning Tree Plus (PVRST+) allows rapid spanning-tree
reconvergence on a per-VLAN spanning-tree basis, without requiring the implementation
of spanning-tree instances.
● Cisco Hot Standby Router Protocol (HSRP) is supported to create redundant, fail-safe
routing topologies.
● Command-switch redundancy enabled in Cisco Network Assistant software allows
designation of a backup command switch that takes over cluster-management functions
if the primary command switch fails.
● Unidirectional Link Detection Protocol (UDLD) and Aggressive UDLD allow
unidirectional links to be detected and disabled to avoid problems such as spanning-tree
loops.
● Switch port autorecovery (errdisable) automatically attempts to reenable a link that is
disabled because of a network error.
● Cisco RPS 2300 support provides superior internal power-source redundancy, resulting
in improved fault tolerance and network uptime.
● Equal cost routing (ECR) provides load balancing and redundancy.
● Bandwidth aggregation up to 8 Gbps through Cisco Gigabit EtherChannel technology
and up to 800 Mbps through Cisco Fast EtherChannel technology enhances fault
tolerance and offers higher-speed aggregated bandwidth between switches and to
routers and individual servers.
● Cisco Express Forwarding hardware routing architecture delivers extremely high-
performance IP routing.
● Basic IP unicast routing protocols (static, RIPv1, RIPv2 and RIPng) are supported for
small-network routing applications.
● Advanced IP unicast routing protocols (OSPF, Interior Gateway Routing Protocol
[IGRP], EIGRP, Border Gateway Protocol Version 4 [BGPv4] and IS-ISv4) are supported
for load balancing and constructing scalable LANs. The IP Services license is required.
● IPv6 routing capability (OSPFv3, EIGRPv6) is support. IP Services license is required.
● Policy-Based Routing (PBR) allows superior control by enabling flow redirection
regardless of the routing protocol configured.
● Inter-VLAN IP routing provides for full Layer 3 routing between two or more VLANs.
● Protocol Independent Multicast (PIM) for IP Multicast routing is supported, including PIM
sparse mode (PIM-SM), PIM dense mode (PIM-DM), and PIM sparse-dense mode. The
IP Services license is required.
● Fallback bridging forwards non-IP traffic between two or more VLANs.
● Per-port broadcast, multicast, and unicast storm control prevents faulty end stations
from degrading overall systems performance.
● IEEE 802.1d Spanning Tree Protocol support for redundant backbone connections and
loop-free networks simplifies network configuration and improves fault tolerance.
● PVST+ allows for Layer 2 load sharing on redundant links to efficiently use the extra
capacity inherent in a redundant design.
● IEEE 802.1s Multiple Spanning Tree Protocol (MSTP) allows a spanning-tree instance
per VLAN, enabling Layer 2 load sharing on redundant links.
● ECR provides load balancing and redundancy.
● VPN routing/forwarding (VRF)-Lite enables a service provider to support two or more
VPNs, with overlapping IP addresses.
● Local Proxy Address Resolution Protocol (ARP) works in conjunction with Private VLAN
Edge to minimize broadcasts and maximize available bandwidth.
● VLAN1 minimization allows VLAN1 to be disabled on any individual VLAN trunk link.
● VLAN Trunking Protocol (VTP) pruning limits bandwidth consumption on VTP trunks by
flooding broadcast traffic only on trunk links required to reach the destination devices.
● Internet Group Management Protocol v3 (IGMP) Snooping for IPv4 and IPv6 MLD v1
and v2 Snooping provide fast client joins and leaves of multicast streams and limits
bandwidth-intensive video traffic to only the requestors.
● IGMP filtering provides multicast authentication by filtering out nonsubscribers and limits
the number of concurrent multicast streams available per port.
● Multicast VLAN registration (MVR) continuously sends multicast streams in a multicast
VLAN while isolating the streams from subscriber VLANs for bandwidth and security
reasons.
Data Sheet
Page 9 of 22