Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion Beyaz Kitap

Anahtar Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion için çevrimiçi göz atın veya pdf Beyaz Kitap indirin. Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion 19 sayfaları. Distributed forwarding card 4 for ws-x68xx, ws-x69xx, and select ws-x67xx modules
Ayrıca Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion için: Kurulum Notu (14 sayfalar), Çözüm Kılavuzu (17 sayfalar), Kurulum Notu (46 sayfalar), Açıklama (1 sayfalar), Ürün Bülteni (6 sayfalar), Uyarı (4 sayfalar), Veri Sayfası (9 sayfalar), Veri Sayfası (18 sayfalar), Beyaz Kitap (18 sayfalar), Yapılandırma Kılavuzu (8 sayfalar), Kurulum Notu (28 sayfalar), Sorun Giderme Kılavuzu (11 sayfalar), Kurulum Notu (18 sayfalar), Kullanıcı Kılavuzu (17 sayfalar), Kurulum Notu (24 sayfalar), Manuel (19 sayfalar), Kurulum Notu (36 sayfalar)

Sayfayı Yazdır
Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion Beyaz Kitap
High Availability for the Cisco Catalyst
Figure 1
The Cisco Catalyst 6500
Series WS-6503,
WS-C6506, WS-C6509,
WS-C6509-NEBS, and
WS-C6513
All contents are Copyright © 1992–2002 Cisco Systems, Inc. All rights reserved. Important Notices and Privacy Statement.
Overview
®
Cisco Catalyst
6500 Series multilayer
switches have become an essential component
of a sound network design in today's enterprise
and service provider environments. Having
such a critical role, the Cisco Catalyst 6500
Series must provide a reliable switching
platform, and offer high performance and
intelligent network services. The high
availability of the Cisco Catalyst 6500 Series
even has the capability to maintain an IP phone
call during supervisor engine failover. This
paper discusses how the Cisco Catalyst 6500
Series provides high system availability
through hardware and software redundancy
features, and focuses specifically on the
following three areas:
Fabric redundancy of the Switch Fabric
Module (SFM)
Supervisor engine redundancy with the Cisco
Catalyst Operating System (Catalyst OS), High
Availability feature, which includes the stateful
protocol redundancy and image versioning
functions
Cisco Systems, Inc.
Page 1 of 19
6500

Series Switches

• Multilayer Switch Feature Card (MSFC)
®
Cisco IOS
Software redundancy
features—Dual Router Mode (DRM),
Configuration-Synchronization
(config-sync), and Single Router
Mode (SRM).
This paper is based on the hybrid software
model for the Cisco Catalyst 6500 Series
(Cisco Catalyst OS on the supervisor engine,
Cisco IOS Software on the MSFC) and not on
the Cisco IOS Software model (native Cisco
IOS Software). All feature set references will
be specifically described as a Cisco Catalyst
OS feature on a supervisor engine or a Cisco
IOS Software feature on an MSFC. The Cisco
Catalyst OS High Availability feature was first
introduced in the Cisco Catalyst OS 5.4 release
and is available for both Cisco Catalyst
Supervisor Engine 1A and Catalyst Supervisor
Engine 2. Support for DRM began in Cisco
IOS Software Release 12.0(7)XE1. The MSFC
config-sync redundancy feature for DRM is
supported in Cisco IOS Software Release
12.1(3a)E4 for both the MSFC and MSFC2.
The MSFC SRM feature was first supported
with Cisco Catalyst OS 6.3.1 and Cisco IOS
Software Release 12.1(8)E2 for the MSFC2.
This paper is the second version of the original
that was written in September 2000. This
version includes some updated sections for
more precise understanding and a discussion of
SRM.
Although component-level redundancy is very
important, a high-availability network design
relies on the proper combination of individual
system redundancy and overall network
White Paper