Crest Audio CPL 5C+ Kullanım Kılavuzu - Sayfa 10

Konuşmacılar Crest Audio CPL 5C+ için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Crest Audio CPL 5C+ 14 sayfaları. Passive 2-way coaxial loudspeaker system

Sayfayı Yazdır

ARCHITECT'S & ENGINEER'S SPECIFICATIONS

e ultra-compact coaxial loudspeaker shall consist of a 5 inch (130 mm) low frequency transducer with 1.5 inch

(38 mm) voice coil and a coaxially mounted 1 inch (25.4 mm) exit Neodymium compression driver with a 1.4 inch

(36 mm) voice coil and a frequency dividing network installed within the enclosure.

Performance speci cations of a typical production unit shall be: Measured sensitivity SPL at 1 m (3.3 ) with 4.0V

input, shall be 92 dB-SPL. Usable frequency response shall extend from 91 Hz to 20 kHz (10 dB below rated

sensitivity, in full space, with no external equalization). Nominal impedance shall be 16 Ohms. Rated power

capacity shall be at least 100 Watts continuous power and 400 Watts peak power, de ned as 6 dB above a test signal

of ltered random noise.

e system shall be protected against damage from occasional over-powering limiting the power to the network

and transducers.

e coaxial neodymium compression driver shall be capable of even coverage at a nominal 80°

horizontal through 80° vertical distributed pattern.

e enclosure shall be constructed from prime-grade 15 mm plywood.

total of three (3) suspension points.

foam.

e external wiring shall be via either two 4-pin twist-lock or one 4-pin Euroblock connectors.

loudspeaker shall be 7.28 inches (185 mm) high by 7.28 inches (185 mm) wide by 8 inches (203 mm) deep

weighing 11.6 pounds (5.3 kg).

e ultra-compact coaxial loudspeaker shall be the Crest Audio CPL 5C + with included U-Bracket.

e grille shall be of heavy-duty steel backed with acoustically transparent

e nish shall be a paintable lightly textured black or white.

e loudspeaker shall be equipped with a