Crest Audio CPL 6+ Kullanım Kılavuzu - Sayfa 4
Konuşmacılar Crest Audio CPL 6+ için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Crest Audio CPL 6+ 16 sayfaları. Passive 2-way loudspeaker system
EN
SPECIFICATIONS
Con guration: Compact 2-way passive speaker
Power Handling*: 75 Watts Continuous, 150 Watts Program, 300 Watts Peak
*To reach the rated power, there must be an infrasonic lter set to 75 Hz, 12 dB / Octave Butterworth minimum ltering. If the CPL 6 + is used with a crossover for a
Subwoofer, then the high pass section needs to meet this criteria at a minimum. A higher frequency and/or lter slope is acceptable.
Nominal Impedance: 16 Ohms
Sensitivity (1W/1m): 92 dB
Maximum SPL (1m): 111 dB @ 75 Watts; 117 dB @ 300 Watts Peak
Frequency Response*: 130 Hz - 17 kHz, ±3 dB
*1m on-axis, swept-sine in anechoic environment
Frequency Range*: 73 Hz - 19 kHz, -10 dB
*1m on-axis, swept-sine in anechoic environment
Box Tuning Frequency: 76 Hz
Nominal Coverage Pattern (-6 dB): 90° H x 60° V
LF Driver: 1 x 6.5" (165 mm) Woofer - Crest Audio GYKW-0630A-1
LF Driver Voice Coil: 1.2" (30 mm)
HF Driver: 1 x 1" (25.4 mm) Compression Driver - Crest Audio CPL69081
HF Driver Voice Coil: 1" (25.4 mm)
Input Connections: 2 x 4-pin twist-lock (NL-4 style) & 1 x 4-pin Euroblock
Input, Pin 1+ = (+) positive; Pin 1- = (-) negative / Loop
rough, Pin 2+ = (+) positive; Pin 2- = (-) negative
Enclosure Material: 0.47" (12 mm) Plywood
Finish: Textured polyurea paint, available in Black & White
Black Finish: RAL: 9004 Signal Black (Pantone: Black 6)
White Finish: RAL: 9003 Signal White (Pantone: 705)
Front: Full-coverage perforated steel grille, backed with acoustically neutral foam
Mounting Provisions: Nine (9) M8 suspension points (2 top, 2 bottom, 2 le , 2 right, and 1 rear) and additional
set of four (4) M6 mounting points rear for optional Peavey Versamount 35
Overall Dimensions (HWD):
Front - 12.52" x 8.78" x 8.98" (318 x 223 x 228 mm)
Rear - 12.52" x 5.83" x 8.98" (318 x 148 x 228 mm)
Net Weight: 14.3 lbs (6.5 kg)
2