DigiPos SLK-TE202 Manuel - Sayfa 6
Yazıcı DigiPos SLK-TE202 için çevrimiçi göz atın veya pdf Manuel indirin. DigiPos SLK-TE202 13 sayfaları.
Sayfayı Yazdır
2-2-2. Cash Drawer Connector
The printer can operate two cash drawers with a 6 pin RJ-11 modular connector.
The driver is capable of supplying a maximum current of 1.0A for 510ms or less when not printing.
PIN
SIGNAL
1
Signal GND
2
Drawer kick-out drive signal 1
3
Drawer open/close signal
4
+24V
5
Drawer kick-out drive signal 2
6
Signal GND
8
DESCRIPTION
-
Output
Input
-
Output
-
2-3. Loading the Roll Paper
Notes: Be sure to use paper rolls that meet the specifications. Do not use paper rolls that have the
paper glued to the core because the printer cannot detect the paper end correctly.
(Turn off power switch)
1. Make sure that the printer is not receiving data; Otherwise, data may be lost.
2. Open the paper roll cover by pushing down the cover open button.
3. Remove the used paper roll core if there is one inside.
4. Insert new paper roll as shown.
9