Cisco 8800 Series Kullanıcı Kılavuzu - Sayfa 27

"#$$%&!'&()&&*!+,#*&!-*.!/0.&#!1023%-4!

If you need to see your phone's desktop while you're on a video call, you can easily switch between the video

and the desktop. When you hide the video, it blurs and moves to the background.

Procedure

Step 1 Press the Call list softkey to hide the video.

Step 2 Press the Show video softkey to show the video.

Adjust the Picture-In-Picture Position

When you are on a video call, you can view your incoming and your outgoing video at the same time, which

is known as Picture-in-Picture (PiP). Typically, the incoming video displays on the full screen and a small

inset screen shows the video from your camera.

When PiP is on, you can move the inset picture to a different quadrant of the screen. You can also change the

view so that your camera video displays on the full screen and the inset displays the incoming video.

Procedure

Step 1 Press PiP

Navigation ring to move the PiP window.

Step 2 (Optional) Press Swap to toggle between the full-screen view and the PiP view.

Stop Your Video

When you're on a video call, you can close the shutter to stop video transmission.

When you close the shutter, the person you're talking to won't see you, but they'll still be able to hear you.

Procedure

Step 1 Turn the ring around the camera counterclockwise to close the shutter. The phone stops video

transmission.

Step 2 Turn the ring around the camera clockwise to open the shutter. The phone starts video transmission.

Adjust the Camera Exposure

You can adjust the camera exposure for the ambient light in your office. Adjust the exposure to change the

brightness of the transmitted video.

Before you begin

The camera shutter must be open.

Procedure

Step 1 Press Applications

Step 2 Select Video > Exposure.

Step 3 Press the Navigation cluster left or right to decrease or increase, the exposure.

Step 4 Click Set.

27 |

P a g e

to move the PiP window counterclockwise around your phone screen. Or, use the

The exposure range is 0 to 15, and the default value is 8.

!"#$%&'(&()%*+&,,--&.+/"+#&0#+/&12"3+