Cisco AJ732A - MDS 9134 Fabric Switch Yapılandırma Kılavuzu - Sayfa 33

Anahtar Cisco AJ732A - MDS 9134 Fabric Switch için çevrimiçi göz atın veya pdf Yapılandırma Kılavuzu indirin. Cisco AJ732A - MDS 9134 Fabric Switch 49 sayfaları. Converged network switches for nx-os 4.0(1a)n1(1)
Ayrıca Cisco AJ732A - MDS 9134 Fabric Switch için: Yayın Notu (48 sayfalar), Yayın Notu (44 sayfalar), Yayın Notu (44 sayfalar), Yayın Notu (36 sayfalar), Yayın Notu (26 sayfalar), Yayın Notu (22 sayfalar), Hızlı Referans Kılavuzu (14 sayfalar), Yayın Notu (3 sayfalar)

Sayfayı Yazdır

Cisco AJ732A - MDS 9134 Fabric Switch Yapılandırma Kılavuzu

Testing connectivity

To test connectivity, issue the ping command from the host (ping the C-Series Fibre Channel switches)

and the switches (ping the server's two IP addresses). If host and switches are able to ping each other's

respective IP addresses you can proceed with the ﬁnal steps.

Presenting iSCSI hosts as virtual Fibre Channel hosts

After establishing IP connectivity, you must conﬁgure the host and switches for iSCSI discovery and login.

Host side: iSCSI Initiator conﬁguration

You must specify the iSCSI targets that the host will access.

Double-click the Microsoft iSCSI Initiator icon to open the iSCSI Initiator Properties window

(Figure

25).

Figure 25 iSCSI Initiator Properties window

On the Discovery Tab, click Add under Target Portals.

The Add Target Portal window opens

(Figure

26).

C-Series iSCSI