Cisco AJ732A - MDS 9134 Fabric Switch Yayın Notu - Sayfa 12

Anahtar Cisco AJ732A - MDS 9134 Fabric Switch için çevrimiçi göz atın veya pdf Yayın Notu indirin. Cisco AJ732A - MDS 9134 Fabric Switch 36 sayfaları. Converged network switches for nx-os 4.0(1a)n1(1)
Ayrıca Cisco AJ732A - MDS 9134 Fabric Switch için: Yapılandırma Kılavuzu (49 sayfalar), Yayın Notu (48 sayfalar), Yayın Notu (44 sayfalar), Yayın Notu (44 sayfalar), Yayın Notu (26 sayfalar), Yayın Notu (22 sayfalar), Hızlı Referans Kılavuzu (14 sayfalar), Yayın Notu (3 sayfalar)

Sayfayı Yazdır
Cisco AJ732A - MDS 9134 Fabric Switch Yayın Notu
Upgrading Your Cisco MDS SAN-OS Software Image
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m .
Table 4
Current
SAN-OS 2.1(3)
SAN-OS 2.1(2e) You can nondisruptively upgrade directly to SAN-OS Release 3.1(3).
SAN-OS 2.1(2d) You can nondisruptively upgrade directly to SAN-OS Release 3.1(3).
SAN-OS 2.1(2b) You can nondisruptively upgrade directly to SAN-OS Release 3.1(3).
SAN-OS 2.1(2)
SAN-OS 2.1(1b) Upgrade to SAN-OS Release 2.1(2b) and then upgrade to Release 3.1(3).
SAN-OS 2.1(1a) Upgrade to SAN-OS Release 2.1(2b) and then upgrade to Release 3.1(3).
SAN-OS 2.0(x)
SAN-OS 1.x
Use
3.1(3). Find the image release number you are currently using in the Current Release with FICON
Enabled column of the table and use the path recommended.
Cisco MDS SAN-OS Release 3.1(3) is not FICON certified.
Note
Cisco MDS 9000 Family Release Notes for Cisco MDS SAN-OS Release 3.1(3)
12
Nondisruptive Upgrade Path to SAN-OS Release 3.1(3) (continued)
Nondisruptive Upgrade Path
You can nondisruptively upgrade directly to SAN-OS Release 3.1(3).
Upgrade to SAN-OS Release 2.1(2b) and then upgrade to Release 3.1(3).
or
Upgrade to SAN-OS Release 2.1(2d) and then upgrade to Release 3.1(3).
or.
Upgrade to SAN-OS Release 2.1(2e) and then upgrade to Release 3.1(3).
or
Upgrade to SAN-OS Release 2.1(3) and then upgrade to Release 3.1(3).
or
Upgrade to SAN-OS Release 2.1(2d) and then upgrade to Release 3.1(3).
or
Upgrade to SAN-OS Release 2.1(2e) and then upgrade to Release 3.1(3).
or
Upgrade to SAN-OS Release 2.1(3) and then upgrade to Release 3.1(3).
or
Upgrade to SAN-OS Release 2.1(2d) and then upgrade to Release 3.1(3).
or
Upgrade to SAN-OS Release 2.1(2e) and then upgrade to Release 3.1(3).
or
Upgrade to SAN-OS Release 2.1(3) and then upgrade to Release 3.1(3).
Upgrade to SAN-OS Release 2.1(2b) and then upgrade to Release 3.1(3).
or
Upgrade to SAN-OS Release 2.1(2d) and then upgrade to Release 3.1(3).
or
Upgrade to SAN-OS Release 2.1(2e) and then upgrade to Release 3.1(3).
or
Upgrade to SAN-OS Release 2.1(3) and then upgrade to Release 3.1(3).
Upgrade to SAN-OS Release 1.3(4a), then to Release 2.1(2b), and then upgrade to
Release 3.1(3).
Table 5
to determine your FICON nondisruptive upgrade path to Cisco MDS SAN-OS Release
OL-12208-05