Cisco BTS 10200 Softswitch Kullanıcı Kılavuzu

Anahtar Cisco BTS 10200 Softswitch için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Cisco BTS 10200 Softswitch 29 sayfaları. T.38 fax relay

Sayfayı Yazdır
Cisco BTS 10200 Softswitch T.38 Fax Relay
Feature History
Release
900.03.02.00
This Feature Module describes the support provided by the Cisco BTS 10200 Softswitch software in
Release 3.2 and 3.3 for ITU-T recommendation T.38 Fax Relay, T.38 Fax Relay is used for transporting
real-time Group 3 Fax documents over the Internet Protocol (IP), commonly used in packet networks.
This feature module includes the following sections:
Introduction, page 2
•
–
–
–
T.38 Benefits, page 4
•
External Interfaces, page 7
•
–
–
–
–
Related Features, page 11
•
Supported Platforms, page 11
•
Supported Standards, page 12
•
Prerequisites, page 13
•
Configuration Tasks, page 13
•
Command Reference, page 13
•
Troubleshooting Fax Relay, page 17
•
Glossary, page 24
•
Copyright Notice, page 27
•
Modification
This feature was initially introduced on the Cisco BTS 10200 Softswitch
in Release 3.2.
Fax Basics, page 2
Fax Relay Basics, page 3
Fax Modes, page 4
Billing Interface, page 7
Alarms/Events, page 7
Measurements, page 7
Provisioning, page 8
Cisco IOS Release xx.x(x)X
1