Accustic Arts AMP I MK 2 Manuel - Sayfa 4

Amplifikatör Accustic Arts AMP I MK 2 için çevrimiçi göz atın veya pdf Manuel indirin. Accustic Arts AMP I MK 2 10 sayfaları.
Ayrıca Accustic Arts AMP I MK 2 için: Manuel (14 sayfalar)

Sayfayı Yazdır
Accustic Arts AMP I MK 2 Manuel
3 Unpacking
The weight of this appliance is approx. 20 kg / 44 lbs. Great care must be exercised when unpacking
the unit.
Carefully store the transportation packaging for the possibility of further use. If you have a claim on the
warranty, always use the original packaging for any necessary transportation. Transportation without
this packaging can lead to damage to the housing.
Please check, if the following items are included:
1 x AC mains cable (type depends on your country)
1 x replacement fuse (type depends on your mains voltage)
4 Positioning
Provided there is available space the power amplifier should, if possible be positioned as close as
possible to the loudspeakers since the loss within the loudspeaker cable is generally higher than with
interconnect cables. Therefore always use the shortest possible loudspeaker cable but of equal length
on the left and right side.
Due to these facts and due to its weight the power amplifier is usually set up in a position near to the
floor either between or near the loudspeakers. If you cannot set up the power amplifier in a free
position, then under no circumstances should the chimney effect of the heat sinks integrated under the
housing cover be restricted. Therefore leave a minimum of 5 cm distance at the sides and 10 cm
distance above the housing cover. Take care that the base of the power amplifier is always stable and
level.
IMPORTANT!

DANGER OF FIRE!!

Please never cover the ventilation slots. This could lead to overheating of
the power amplifier and cause serious damage.
5