BYOC Tremelo Talimatlar Kılavuzu - Sayfa 15

Müzik Pedalı BYOC Tremelo için çevrimiçi göz atın veya pdf Talimatlar Kılavuzu indirin. BYOC Tremelo 16 sayfaları.

Finishing up & Troubleshooting

1. Test the pedal to make sure it works.

2. Put the cover on and screw it down.

3. Apply the rubber feet.

4. Turn on your amp and rock out.

Is you pedal working? Here s a few common mistakes:

1. No sound at all in either the bypass or on position. If you aren t getting sound in

bypass then you did not wire your footswitch correctly. Getting the bypass to work is the

first thing you need to worry about.

2. Bypass works and the LED lights up when on , but there s no sound. You either

have a problem with the wiring from the in and/or the out of the circuit board and foot

switch. Or you have a problem with something on the circuit board.

3. Bypass works, but there s no sound when on and the LED does not come on.

You probably aren t getting any power to the circuit. Check all the black and red wires.

If none of this helps, and you can t seem to figure out the problem, I always find that it is

best to just set the pedal aside for a day or 2 and then come back to it with a fresh pair of

eyes. Then the problem usually jumps right out at you .usually.

If you still can t get it working, start a thread on the BYOC forum

board.buildyourownclone.com

and ask for help.