Cisco Catalyst 2960-X Başlangıç Kılavuzu - Sayfa 4

Anahtar Cisco Catalyst 2960-X için çevrimiçi göz atın veya pdf Başlangıç Kılavuzu indirin. Cisco Catalyst 2960-X 25 sayfaları.
Ayrıca Cisco Catalyst 2960-X için: Donanım Kurulum Kılavuzu (34 sayfalar), Donanım Kılavuzu (20 sayfalar)

Sayfayı Yazdır

Cisco Catalyst 2960-X Başlangıç Kılavuzu

1. Getting Started with Your Switch
2. Box Contents
3. Running Express Setup
4. Managing the Switch
5. Connecting to the Switch Ports
6. Troubleshooting

Step 2

During Express Setup, the switch acts as a DHCP server. If your PC has a static IP address, temporarily configure your

PC settings to use DHCP before proceeding to the next step.

Write down the static IP address. You will need this IP address in Step

Note

12.

Step 3

Power the switch by connecting the AC power cord to the switch power supply and to a grounded AC outlet.

For information about installing the power supplies in the Catalyst 2960-XR switches, see the hardware guide at

www.cisco.com/go/cat2960xr_docs

Step 4

Observe the POST results.

http://