DigiSender Zentrum Control DG420 Kullanım Kılavuzu - Sayfa 8
Verici DigiSender Zentrum Control DG420 için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. DigiSender Zentrum Control DG420 10 sayfaları.
Sayfayı YazdırDG420 Installation Guide
Connecting your
DigiSender Zentrum
The DigiSender™ Control Zentrum™ Transmitter will
form the 'hub' of your home entertainment system,
handling the following functions: Transmission of an
audio/video source to a second room in your home,
SCART switching for your main TV and the transfer
of material between your recording devices - VCR
and/or DVDR.
Removing all existing
connections between devices
may simplify installation &
configuration of this unit.
Satellite/Cable Receiver
RF2
RF1
The SAT/CABLE socket on the
transmitter must be connected
to the 'TV OUT' SCART socket
AERIAL IN
on your satellite or cable
receiver.
See the FAQ if these
connections are not available.
DVD or DVDR
For DVD players, please
connect the DVD socket on the
transmitter to the SCART
socket on your player. For
recorders it should be
connected to a combined
IN/OUT socket. If this is not
available i.e. separate IN and
OUT then you will require part:
SCT03X2
Page 8
Transmitter
Auxiliary INPUT
To Camcorder, Games
Console, Hi-Fi etc.
SAT
VCR SCART
AUDIO
OUT
TV SCART
S-VIDEO
DVD
ANALOG
AUDIO
TV SCART
S-VIDEO
Online Support at www.digisender.net
Controlling your
second
television source
Unique to the Zentrum range is the ability for a
viewer in the second location (e.g. bedroom) to
choose the device they want to watch -
POWER
Please read this instruction manual carefully prior to installation
DG420 Operation Guide
Satellite/Cable, DVD, VCR or Camcorder. This
operation is completed by simply using the supplied
remote control unit.
Source LED's
A blue light will indicate the source being
transferred to your 2nd television.
On power up, no lights will show until a source is
manually selected (see below)
To select the device you wish to
watch on the 2nd TV:
Remote Control
Press 'SAT/CABLE', 'DVD/r', 'VCR', or 'AUX' to
choose the source on your 2nd TV.
You must direct the remote control at the
DigiSender™ Control Zentrum™ receiver unit.
Page 13