DigiSender TV DG258-2RX Kurulum Kılavuzu - Sayfa 8

Alıcı-Verici DigiSender TV DG258-2RX için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. DigiSender TV DG258-2RX 20 sayfaları. Twin input 5.8ghz wireless av sender system with 2 receivers

Sayfayı Yazdır
DG258-2RX - DigiSender HQ2RX - Twin Input 5.8GHz Wireless AV Sender System with 2 Receivers
Installing your DigiSender®

Step 4 - Install the Receiver

The Receiver will pick up the signals being sent by your Transmitter and output them to a connected
TV. Repeat steps 1 to 4 for your second Receiver.
1.
Locate a vacant SCART socket on the back of your
receiving TV and insert the DigiSender® SCART
cable.
3.
Connect the Power Supply Unit (PSU) to the socket
labelled 'PSU' on the Receiver.
Page 08
2.
Ensure that the Audio/Video and Remote Relay
Channel switches on the back of the Receiver are
set to 1.
4.
Connect the Power Supply Unit (PSU) to an avail-
able mains socket.
Please read the instructions carefully prior to installation