FIBARO FGMS-001 Kullanım Kılavuzu - Sayfa 8
Aksesuarlar FIBARO FGMS-001 için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. FIBARO FGMS-001 11 sayfaları. Motion sensor
Ayrıca FIBARO FGMS-001 için: Kullanım Kılavuzu (20 sayfalar), Kullanım Kılavuzu (2 sayfalar)
Sayfayı Yazdır
14
9. Motion detection - night/day
This parameter defines the difference between night and day in terms
of light intensity, used in parameter 8.
Available settings: 1-32767 (1-32767 lux)
Default setting:
12. BASIC command class configuration
i
NOTE
This parameter determines the command frames sent to 2nd associa-
values of BASIC On
tion group (assigned to PIR sensor).
and BASIC OFF com-
mand frames can be
Available settings: 0 - BASIC On and OFF command frames sent in
modified with dedi-
cated parameters (14
and 16).
Default setting:
14. BASIC ON command frame value
The command frame sent at the moment of motion detection. Fur-
ther motion detections, during the cancellation time, will not result
in sending the association.
Available settings: 0-255
Default setting:
16. BASIC OFF command frame value
The command frame sent at the moment of motion alarm cancella-
tion, after cancellation delay time specified in parameter 6.
Available settings: 0-255
Default setting:
18. Associations in Z-Wave network Security Mode
This parameter defines how commands are sent in specified associa-
tion groups: as secure or non-secure. Parameter is active only in Z-Wave
network security mode. It does not apply to 1st group "Lifeline".
Available settings: 0 - none of the groups sent as secure
Default setting:
ADvAnCED PARAMETERS
200 (200 lux) Parameter size:
2 [bytes]
Basic Command Class
1 - only the BASIC On command frame sent in
Basic Command Class
2 - only the BASIC OFF command frame sent in
Basic Command Class
0
Parameter size:
1 [byte]
255
Parameter size:
2 [byte]
0
Parameter size:
2 [bytes]
1 - 2nd group sent as secure
2 - 3rd group sent as secure
4 - 4th group sent as secure
8 - 5th group sent as secure
0-15
Parameter size:
1 [byte]
20. Tamper - sensitivity
This parameter determines the change in force acting on the device,
that will result in reporting tamper alarm - g-force acceleration.
Available settings: 0 - tamper inactive
1-121 - (0.08-2g; every 0.016g)
Default setting:
20 (0.4g)
Parameter size:
22. Tamper - alarm cancellation delay
Time period after which a tamper alarm will be cancelled in the main
controller and associated devices.
Any tampering detected during this period will not extend the delay.
Available settings: 1-32767 (in seconds)
Default setting:
30 (30s)
Parameter size:
24. Tamper - operating modes
This parameter determines function of the tamper and sent reports.
It is an advanced feature serving much more functions than just de-
tection of tampering.
Available settings: 0 - tamper only
1 - tamper and earthquake detector
2 - tamper and orientation in space
Default setting:
0
Parameter size:
25. Tamper - alarm cancellation
This parameter allows to disable cancellation of the tamper alarm.
Available settings: 0 - do not send tamper cancellation report
1 - send tamper cancellation report
Default setting:
1
Parameter size:
28. Tamper - broadcast mode
The parameter determines whether the tamper alarm frame will or
will not be sent in broadcast mode. Alarm frames sent in broadcast
mode can be received by all of the devices within range (if they ac-
cept such frames), but not repeated by them.
Available settings: 0 - tamper alarm sent to 3rd association group
1 - tamper alarm sent in broadcast mode
0
Default setting:
Parameter size:
29. Tamper - backward compatible broadcast mode
The parameter determines whether the backward compatible tam-
per alarm frame will or will not be sent in broadcast mode. Alarm
frames sent in broadcast mode can be received by all of the devices
within range (if they accept such frames), but not repeated by them.
15
1 [byte]
2 [bytes]
1 [byte]
1 [byte]
i
NOTE
Device operating in
Security Mode does
not send frames in
broadcast mode. In
this case leave the de-
fault values of param-
eters 28 and 29.
1 [byte]
ADvAnCED PARAMETERS