FIBARO Dimmer 2 Hızlı Başlangıç Kılavuzu - Sayfa 8
Dimmer FIBARO Dimmer 2 için çevrimiçi göz atın veya pdf Hızlı Başlangıç Kılavuzu indirin. FIBARO Dimmer 2 14 sayfaları.
Sayfayı Yazdır
2021. 04. 16.
Setting
0
1 - 99
Parameter 20: Switch type
Choose between momentary, toggle and roller blind switch.
Size: 1 Byte, Default Value: 0
Setting
0
1
2
Parameter 21: The value sent to associated devices on single click
This parameter defines the value sent to devices associated with Dimmer 2 after its enabling.
Size: 1 Byte, Default Value: 0
Setting
0
1
Parameter 22: Assign bistable key status to the device status
By default each change of toggle switch position results in action of Dimmer 2 (switch on/off ) regardless the physical connection of conntacts.
Size: 1 Byte, Default Value: 0
Setting
0
1
Parameter 23: Double click option
Size: 1 Byte, Default Value: 1
Setting
0
1
Parameter 24: Command frames sent in 2-nd and 3-rd association groups (S1 associations)
Parameter determines, which actions will not result in sending framesto association groups.
NOTE: Parameter 24 values may be combined, e.g. 1+2=3 means that associations onswitching ON or OFF the Dimmer 2 (single click) will not be sent.
Size: 1 Byte, Default Value: 0
Setting
0
1
2
4
8
0
Parameter 25: Command frames sent in 4-th and 5-th association groups (S2 associations)
Parameter determines, which actions will not result in sending frames to association groups.
NOTE: Parameter 25 values may be combined, e.g. 1+2=3 means that associations onswitching ON or OFF the Dimmer 2 (single click) will not be sent.
Size: 1 Byte, Default Value: 0
https://manual.zwave.eu/backend/make.php?lang=en&sku=FIBEFGD-212
https://manual.zwave.eu/backend/make.php?lang=en&sku=FIBEFGD-212
Description
function disabled
percentage level of brightness
Description
momentary switch
toggle switch
roller blind switch - two switches operate the Dimmer 2 (S1 to brighten, S2 to dim)
Description
0xFF value is sent, which will set associated devices to their last saved state.
Current Dimmer state is sent, which will synchronize brightness level of associated devices (other Dimmers for
example).
Description
Device changes status on key status change.
Device status is synchronized with key status.
Description
double click disabled
double click enabled.
Description
all actions send to association groups
do not send when switching on the Dimmer (single click)
do not send when switching off the Dimmer (single click)
do not send when changing dimming level (holding and releasing)
do not send on double click
all actions send to association groups
8/14