Sharp EBR-9900W Talimatlar
Mikrodalga Fırın Sharp EBR-9900W için çevrimiçi göz atın veya pdf Talimatlar indirin. Sharp EBR-9900W 17 sayfaları. Built-in kit
Ayrıca Sharp EBR-9900W için: Talimatlar (16 sayfalar)
Sayfayı Yazdır
A32965,EBR-9900 O/M
Before installing a Sharp M icrow ave Oven, read and check the follow ing points.
SAFETY INFORM ATION
1.
2.
Disconnect the oven from the pow er supply before installation.
3.
Surround
a. M ake sure that the EBR-9900 is the correct surround for your oven.
b. The Sharp M icrow ave Ovens are designed to either stand neatly on a kitchen counter top or to be built
c. The EBR-9900 surround w ill becom e hot during oven operations w hen using the heater elem ents.
4.
Kitchen cabinet
Prepare the kitchen cabinet as follow s;
a. The kitchen cabinet m ust be of the follow ing dim ensions as show n in Fig. 1.
b. M ake sure that the back w all of the cupboard D is alw ays fitted to ensure the correct ventilation of
c. The shelf of the kitchen cabinet should be m ade to w ithstand the w eight of the m icrow ave oven to
5.
Installation near to a conventional oven
a. When a m icrow ave oven is to be installed next to a conventional oven, sufficient space betw een them
b. A built-in m icrow ave oven m ust not be installed above a conventional oven otherw ise the m icrow ave
6.
Installation near a refrigerator or freezer
a. If the m icrow ave oven is to be installed above a refrigerator or freezer requiring back ventilation, a
b. Do not install the m icrow ave oven above a refrigerator or freezer w hich are ventilated at the front.
7.
Fixing
To avoid any possibility of the kitchen cabinet m oving w hen the m icrow ave oven is installed, it is
essential that the kitchen cabinet is fixed to the back w all.
8.
Adjustm ent and repair
It is dangerous for your oven to be adjusted or repaired by anyone except properly qualified service
technicians trained by Sharp.
If the appliance is ever rem oved from the cabinet it should be re-installed in accordance w ith these
instructions, w hich should be kept in a safe place for future reference.
Downloaded from:
http://www.usersmanualguide.com/
Instruction for SHARP Built-in Kit EBR-9900 (W)/ (SL)
Except U.K., for use in continental Europe only.
The oven m ust be connected to an electric circuit provided w ith a sw itch (contact gap no less than 3
m m ) to disconnect the oven in case of danger. A safety-device like a fuse in the installation m ay be
used as a sw itch.
into a fitted kitchen cabinet using the surround.
Take care to prevent burns w hen you use the oven.
WIDTH
: 560 m m - 568 m m
HEIGHT
: 450 m m
DEPTH
: 550 m m - 580 m m
the oven and that the ventilation gap C is 45 m m as show n in Figs 1 and 2.
be installed and the heaviest item likely to be cooked in the m icrow ave oven. Refer to the operation
m anual for m icrow ave oven w eight.
should be allow ed to prevent overheating as the surround can w arp w ith excessively high tem pera-
tures.
Obviously, it is im portant to adhere strictly to the conventional oven m anufacturer's
installation instructions.
oven's cooling system m ay be adversely affected by hot air produced by the conventional oven.
ventilation duct behind the m icrow ave oven m ust be provided. It is essential that the refrigerator/
freezer m anufacturer's installation procedures are follow ed.
1