ACTOR-MATE Rock Star Manuel - Sayfa 3

DJ Ekipmanları ACTOR-MATE Rock Star için çevrimiçi göz atın veya pdf Manuel indirin. ACTOR-MATE Rock Star 5 sayfaları.

Sayfayı Yazdır

Operating Modes

1.Stand-Alone Operation (Sound Active Mode)

Sound Active mode

This unit has built-in program that will react to sound and music under Sound Active mode. Set

all DIP switch pins to OFF to run Sound Active mode

2.DMX Operation

DMX operation gives the user freedom to create his/her own programs tailored to their own

individual needs.

To run this unit in DMX mode, connect the unit to any standard DMX controller via XLR connectors.

Please consult DMX controller manual to determine address.

DMX Signal Levels

Channel 1

Laser pattern and effect

controls

Value

Effect

0-1

OFF

2-101

50 patterns

102-201

50 animations

202-255

Sound Active

Function Selection Chart

OFF OFF OFF OFF OFF OFF OFF OFF OFF

/ : Not Used

Trouble Shooting

If there is no light from the unit, please check the main power supply and fuse.

If unit does not respond to DMX, please check the DMX cables are connected properly and are wired

correctly.

If unit does not response to the music please adjust the sound-active sensitivity level by Sensitivity

Adjustment Knob.

If problems cannot be solved please contact your dealer for service

Cleaning

Use a soft cloth and normal glass cleaner to clean the outside casing. Cleaning frequency depends on

the environment in which the fixture operates.

Be sure to dry all parts before plugging the unit back in.

Fuse Replacement

Always disconnect from main power supply before attempting to replace the fuse

Remove the old fuse from the holder and replace with the exact same type fuse. Replacement with

anything other than the specified part may damage your unit.

Channel 2

Movement speed control.

Channel-2 is functional only

when value at channel-1 is

set between 102 and 201.

Value

0-42

43-85

86-128

129-171

172-214

215-255

SLOW

DIP SWITCHES CHART

SET ADDRESS

Channel 3

Line effect control. User

can change the patterns

to dot-line patterns by

control this channel.

Speed

e.g.

FAST

FUNCTION

SOUND MODE

DMX MODE