Sharp Aquos LC 20S4U Kullanım Kılavuzu - Sayfa 25
LCD TV Sharp Aquos LC 20S4U için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Sharp Aquos LC 20S4U 43 sayfaları. Sharp operation manual liquid crystal television lc-20s4u
Ayrıca Sharp Aquos LC 20S4U için: Kullanım Kılavuzu (45 sayfalar)
Sayfayı Yazdır
Useful Features
CH-SETTING
■ EZ SETUP
When you move to an area with different broadcasting
signals, you may have to set the channel numbers and
the time with the EZ SETUP function. To activate EZ
SETUP, perform the following procedures.
1 Press '/" to select "CH-SETTING" in the SETUP screen (see
page 20) and press ENTER.
2 Press '/" to select "EZ SETUP", and press ENTER.
3 Press '/" to select "YES", and press ENTER.
Refer to page 14 for more information on EZ SETUP.
■ Setting the AIR/CABLE
It is necessary to set the receiving mode to AIR or CABLE
channels to receive locally broadcast TV programs.
1
Press MENU to display the Menu screen.
2
Press \/| to select "SETUP".
3
Press '/" to select "CH-SETTING", and press ENTER.
4
Press '/" to select "AIR/CABLE", and press ENTER.
Press '/" to select desired setting, and press ENTER.
E Z
S E T U P
A I R / C A B L E
C H
S E A R C H
C H
M E M O R Y
5
Press MENU to exit.
A
• Receivable channels of your LCD TV set are:
AIR channels:
VHF: 2 through 13.
UHF: 14 through 69.
24
A I R
C A B L E
CABLE channels:
1 (HRC and IRC)
2 through 125 (STD, HRC and IRC)
■ Saving broadcast TV channels in the memory
1
Repeat steps 1 to 3 of Setting the AIR/CABLE.
2
Press '/" to select "CH SEARCH", and press ENTER.
E Z
S E T U P
A I R / C A B L E
C A B L E
C H
S E A R C H
C H
M E M O R Y
3
Press ENTER. The tuner will search through all available
channels in your area and add them to the TV memory.
S T E R E O
S A P
M O N O
A
• To interrupt CH SEARCH, press MENU RETURN. CH SEARCH will
stop at the current channel and will not add any higher channels.
■ Adding weak or additional channels or erasing
unwanted channels from TV memory
Individual settings of programs can be adjusted.
1
Repeat steps 1 to 3 of Setting the AIR/CABLE.
2
Press '/" to select "CH MEMORY", and press
ENTER.
E Z
S E T U P
A I R / C A B L E
C H A N N E L
C H
S E A R C H
S K I P
C H
M E M O R Y
3
Press '/" to move the cursor to "CHANNEL", and use
\/| or Channel Select to select each desired channel
to add or erase.
4
Press '/" to move the cursor to "SKIP", and use \/|
to select "ON" or "OFF".
5
Press MENU to exit.
A
• If CH SEARCH is performed again, the previously memorized
channels will be lost.
1
2
A I R
2
O N