Sharp Aquos LC 40E77UN Kullanım Kılavuzu - Sayfa 24
LCD TV Sharp Aquos LC 40E77UN için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Sharp Aquos LC 40E77UN 47 sayfaları. Sharp flat panel television user manual
Sayfayı Yazdır
On-Screen Display Menu
Film Mode (3:2 pull-down)
Automatically detects a fi lm-based source (originally
encoded at 24 frames/second), analyzes it then recreates
each still fi lm frame for high-defi nition picture quality.
On: Detects, analyzes, converts fi lm source.
Off: Normal viewing mode.
•
"Film Mode" is not selectable when channel display shows
an input resolution of 480p, 720p, or 1080p.
Digital Noise Reduction
Produces a clearer video image.
Off: No adjustment
High/Middle/Low: Select a desired level for viewing a
clearer video image.
3D-Y/C
Provides high quality images with minimal dot crawl
and cross color noise.
Slow: For still images.
Standard: Normal adjustment.
Fast: For moving images.
Off: For Game Mode.
•
3D-Y/C is available for input signal from Composite Video
and analog broadcasts (air and cable).
Monochrome
For viewing a video in monochrome.
On: For viewing in monochrome.
Off: Normal color.
Range of OPC
The brightness level range of the OPC sensor's automatic
adjustments can be set according to your preferences.
The adjustment range of the OPC sensor can be set to
a maximum of +16 and a minimum of –16.
Max.: –15 through +16
Min.: –16 through +15
•
The maximum setting cannot be set to a smaller number
than the minimum setting.
•
The minimum setting cannot be set to a bigger number
than the maximum setting.
•
Depending on the brightness of the surrounding light, the OPC
sensor might not operate if the adjustment range is small.
22
Audio Menu
You can adjust the sound quality to your preference
with the following settings.
Example
Audio
Treble
[ 0]
15
Bass
[ 0]
15
Balance
[ 0]
Surround
Bass Enhancer
Reset
1
Press MENU to display the MENU screen, and then
press c/d to select "Audio".
Press a/b to select a specifi c adjustment item.
2
•
Select "Surround" or "Bass Enhancer" and then press
ENTER to set each item.
Press a/b (or c/d) to select the desired setting,
3
and then press ENTER.
4
Press MENU to exit.
cbutton
Selected item
Treble
For weaker treble
Bass
For weaker bass
Balance
Decrease audio from
the right speaker
•
Audio menu is grayed out when Output Select is set to
"Variable". (See page 29.)
•
For resetting all Audio adjustment items to the factory
preset values, press a/b to select "Reset", press ENTER,
press a/b to select "Yes", and then press ENTER.
Surround
Surround function allows you to enjoy realistic "live" sound.
On: Surround function is on.
Off: Normal sound.
•
You can choose Surround by pressing SURROUND on the
remote control unit. (See page 15.)
•
Audio menu is grayed out when Output Select is set to
"Variable". (See page 29.)
•
For some discs, setup may be required on your DVD player. In this
case, please refer to the operation manual of your DVD player.
Bass Enhancer
This function allows you to enjoy bass-enhanced sound.
On: Bass Enhancer function is on.
Off: Normal sound.
•
Audio menu is grayed out when Output Select is set to
"Variable". (See page 29.)
15
15
R
L
dbutton
For stronger treble
For stronger bass
Decrease audio from
the left speaker