Sharp Aquos LC-13B8U Kullanım Kılavuzu - Sayfa 27

LCD TV Sharp Aquos LC-13B8U için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Sharp Aquos LC-13B8U 39 sayfaları. Sharp television lc-13b8u operation manual

Sayfayı Yazdır
Sharp Aquos LC-13B8U Kullanım Kılavuzu
Useful Features (Continued)
■ Activating V-CHIP BLOCK
● Setting STATUS
You can activate V-CHIP BLOCK after setting V-CHIP.
1
Repeat steps 1 to 4 of Setting V-CHIP on page 25.
2
Press '/" to select "STATUS", and press ENTER.
M P A A
T V
G U I D E L I N E S
C A N . E N G L I S H
C A N . F R E N C H
S T A T U S
3
Press '/" to select "ON", and press ENTER.
O N
O F F
A
• If "STATUS" is set to "OFF", V-CHIP BLOCK will not be
activated.
4
Press MENU to exit.
■ Canceling the V-CHIP BLOCK screen while
V-CHIP BLOCK is activated
1
"V-CHIP HAS BEEN ACTIVATED" appears if you watch
a program with the same Program Rating data you
configured.
V – C H I P
H A S
A
• "V-CHIP HAS BEEN ACTIVATED" will not be displayed if
"STATUS" is set to "OFF".
2
Press MENU to display "INPUT SECRET NO.".
–
–
–
–
3
Input the 4-digit secret number by using Channel
Select; V-CHIP BLOCK is temporarily canceled. If you
input an incorrect secret number, "SECRET NO. IS
INCORRECT." is displayed. In this case, input the
correct secret number.
26
R A T I N G S
R A T I N G S
B E E N
A C T I V A T E D
T V – 1 4
D L S V
■ Changing V-CHIP BLOCK settings
1
Repeat steps 1 to 3 of Setting V-CHIP on page 25,
then "INPUT SECRET NO." will be displayed.
–
–
–
–
2
Input the 4-digit secret number by using Channel
Select; the V-CHIP select mode will be displayed.
Set the V-CHIP BLOCK again.
M P A A
T V
G U I D E L I N E S
C A N . E N G L I S H
C A N . F R E N C H
S T A T U S
■ Changing or clearing the SECRET NUMBER
If you forget the secret number, clear the secret number
as follows.
Upper control panel of the main unit
1
Repeat steps 1 to 3 of Setting V-CHIP on page 25, or
1 and 2 of Canceling the V-CHIP BLOCK screen
while V-CHIP BLOCK is activated, then "INPUT
SECRET NO." will be displayed.
2
Press and hold both CH ( ) and VOL (+) on the main
unit simultaneously until the message "INPUT SECRET
NO." blinks.
3
Press MENU to exit.
R A T I N G S
R A T I N G S
CH (
)
VOL (+)
MENU