Sharp Aquos LC-15S1E Servis Kılavuzu - Sayfa 2

LCD TV Sharp Aquos LC-15S1E için çevrimiçi göz atın veya pdf Servis Kılavuzu indirin. Sharp Aquos LC-15S1E 43 sayfaları. Lcd colour television
Ayrıca Sharp Aquos LC-15S1E için: Kullanım Kılavuzu (47 sayfalar), Kullanım Kılavuzu (48 sayfalar)

Sayfayı Yazdır

ADJUSTING PROCEDURE OF EACH SECTION

The best adjustment is made before shipping. If any position deviation is found or after part replace is performed,

adjust as follows.

Preparation for adjustments

Use the dedicated AC adaptor or stable DC power supply.

LC-13/15S1E AC adaptor: UADP-A043WJPZ

DC power supply: 12V 5.0A

1. Adjusting procedure

• Checker adjustment

Power ON (Adjustment processing mode) → +B adjustment → Counter bias adjustment → TAMP (Contrast)

adjustment → White balance adjustment

2. Entering the adjustment processing mode

There are the following two methods.

• Setting the pin (81)(KEY4) or pin (82)(KEY5) of IC2001 (microprocessor) to GND, turn on the power.

• A "POWER" key is made on with pushing an "TV/VIDEO" and "MENU" keys at the same time.(K of the inspection

process mode is displayed by the upper left of the image plane.) → Next, "CH (Ù)" and "VOL (–)" keys are pushed

at the same time.(It becomes the image plane of the adjustment process mode.).....When it is canceled, it is made

to turn it off.(Even off in the "MAIN POWER" key, off with R/C are good.)

3. Key operation in the adjustment process mode

• The receiving channel UP/DOWN is performed with the "CH (ù)/(Ù)" keys.

One push ... The UP/DOWN tuning is performed per channel.

Continuous push ... The UP/DOWN search is performed until a next receivable station is found.

• Various adjustments

The adjustment is performed for each item by the "MENU", "Menu cursor", "CH (ù)/(Ù)" or "VOL (+)/(–)" keys

(LCD TV set and remote control).

• Adjustment item is chosen with the Menu cursor upward/downward keys.

• The adjustment item makes a toggle operation with the "MENU" key input. (Next item)

If the "MENU" key is input while the bottom item is selected, it moves to the top item on the next page.

• Press the auto preset button on the remote controller in the adjustment process mode, and the top item of the

next page will show up regardless of which item appears now.

Page 1 → Page 2 → ... → Page 66 → Page 1

• Press the manual memory button on the remote controller in the adjustment process mode, and the top item of

the same page will show up.

• UP/DOWN of each adjustment vale selected is performed with the VOL (+)/(–) keys input.

LC-13S1E

LC-15S1E