Sharp AQUOS LC-22SB28UT Kullanım Kılavuzu - Sayfa 18
LCD TV Sharp AQUOS LC-22SB28UT için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Sharp AQUOS LC-22SB28UT 32 sayfaları. Sharp liquid crystal display tv
Ayrıca Sharp AQUOS LC-22SB28UT için: Kullanım Kılavuzu (34 sayfalar)
Sayfayı Yazdır
Connecting to External Equipment
Connecting an Audio Amplifier
■ When using coaxial cable:
It is possible to output audio through the DIGITAL AUDIO COAXIAL terminal.
Rear of the TV
Connecting a PC
■ When using HDMI cable (INPUT 3):
Rear of the TV
NOTE
•
Depending on the board, only video signals may be output. In this case, in addition to connecting an HDMI-certified cable to
the INPUT 3 (HDMI) terminal, connect an audio cable to the AUDIO PC/HDMI terminal and set "HDMI1 Audio" to "DVI". (See
page 27.)
•
The HDMI terminals only support digital signal.
■ When using DVI-HDMI conversion cable (INPUT 3):
Rear of the TV
NOTE
•
When using an DVI-HDMI conversion cable, you should make an analog audio connection. In this case, in addition to
connecting an DVI-HDMI conversion cable to the INPUT 3 (HDMI) terminal, connect an audio cable to the AUDIO PC/HDMI
terminal and set "HDMI Audio" to "DVI". (See page 27.)
16
Coaxial cable
DVI-HDMI conversion cable
Ø 3.5 mm stereo minijack cable
COAXIAL
DIGITAL AUDIO INPUT
HDMI-certified cable
HDMI OUT
HDMI OUT
DVI OUT
AUDIO