Sharp AQUOS LC-32M450M Kullanım Kılavuzu - Sayfa 7
LCD TV Sharp AQUOS LC-32M450M için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Sharp AQUOS LC-32M450M 8 sayfaları. Aquos lcd colour television
Sayfayı Yazdır
Option menu (Continued)
H Game play time
This function displays the elapsed game time so you
do not lose track of the time.
To display the elapsed time, select "GAME" under
"AV mode" for the input mode of the terminal
connected to the game console before starting the
game.
Selected item
Description
On
The elapsed time is displayed every 30
minutes when you switch to GAME mode
in external input mode.
Off
Hides the time.
H Colour system
You can change the colour system to one that is
compatible with the image on the screen. (Auto,
PAL, SECAM, NTSC 3.58, NTSC 4.43, PAL-60)
NOTE
• If "Auto" is selected, colour system for each channel is
automatically set. If an image does not display clearly,
select another colour system (e.g. PAL, NTSC 4.43).
• "Colour system" is selectable only when inputting an
S-VIDEO or composite signal.
H Fine sync. (PC input mode only)
Adjusting the PC image automatically
Auto sync.
This function enables the screen to be automatically
adjusted to its best possible condition when the
analogue terminals of the TV and PC are connected
with a commercially available RGB cable, etc.
NOTE
• Auto sync. is likely to succeed when an input PC image
has wide vertical stripes (e.g. pattern with high contrast
stripes, or cross-hatched).
It may fail when an input PC image is solid (low contrast).
Adjusting the PC image manually
Ordinarily you can easily adjust the picture as
necessary to change image position using Auto
sync. In some cases, however, manual adjustment is
needed to optimise the image.
Selected item
Description
H-Position
Centres the image by moving it to the left
or right.
Centres the image by moving it up or
V-Position
down.
Adjusts when the image fl ickers with
Clock
vertical stripes.
Phase
Adjusts when characters have low
contrast or when the image fl ickers.
NOTE
• For resetting all adjustment items to the factory preset
values, press a/b to select "Reset", press ENTER, press
c/d to select "Yes", and then press ENTER.
• Images may not be displayed properly depending on the
settings and/or input signals.
Input signal
• Some input signals may have to be registered
manually to display properly.
• The pairs of input signals (resolutions) in the list
below are not distinguishable when received.
In such case, you have to set the correct signal
manually. After setting once, it will display when the
same signal (resolution) is input again.
1280 g 768
1360 g 768
H DivX(R) Reg. Code
Please see USB Media Player Operation Manual.
H Version up
This function is only for service personnel to use for
software updates.
Picture and still image
You can freeze a motion picture on the Display.
1
Press FREEZE.
• A still image displays.
2
Press RETURN again to exit still image.
NOTE
• The still image automatically goes out after 30 minutes.
• FREEZE doesn't function for PC input (all resolution).
Wide Mode
Auto Selection
If you set "WSS" and "4:3 mode" in the Setup menu,
the optimum WIDE mode is automatically chosen for
every broadcast containing the WSS information.
"WSS" menu
To enable Auto Selection, set "WSS" in the Setup
menu to "On". (See page 11.)
"4:3 mode" menu
To set the type of the wide screen, select "Panorama"
or "Normal" in the 4:3 mode menu. (See page 11.)
4:3 mode set to "Panorama"
4:3 mode set to "Normal"
NOTE
• If the broadcast signal contains no WSS information, Auto
Selection will not function even when the WSS option is
enabled.
Wide Mode (Continued)
Manual Selection
You can select different picture sizes that account for
the kind of each picture.
1
Press WIDE.
• The WIDE MODE menu displays.
• The menu lists the wide mode options selectable for
the type of video signal currently received.
2
Press WIDE or a/b while the WIDE MODE
menu displays on the screen.
• As you toggle down the options, each mode is
immediately refl ected on the TV.
Selected item
Description
For 4:3 "standard" pictures. A side bar
Normal
appears on each side.
For 14:9 letterbox pictures. A thin side
Zoom 14:9
bar appears on each side, and you may
also see bars on the top and bottom with
some programmes.
In this mode the picture is progressively
Panorama
stretched toward each side of the screen.
For 16:9 squeeze pictures.
Full
Cinema 16:9
For 16:9 letterbox pictures. Bars may
appear on the top and bottom with some
programmes.
For 14:9 letterbox pictures. Bars may
Cinema 14:9
appear on the top and bottom with some
programmes.
Dot by Dot
Displays an image with the same number
of pixels on the screen (only when
receiving a 1080i/1080p/SXGA/SXGA+
signal for LC-40M550M)
Underscan
Display with an Underscan image only
when receiving a 720p/1080p/1080i
signal (only for LC-32M450M)/a 720p
signal (only for LC-40M550M). Display
with the High-Defi nition image adjusted
optimally. Noise may appear on the edge
of the screen with some programmes.
NOTE
• Some picture sizes may not be displayable depending on
the input signal.
Teletext function
What is Teletext?
Teletext broadcasts pages of information and
entertainment to specially equipped television sets.
News, weather reports, sports information, stock
exchange prices and programme previews are
among the many services available.
Turning on and off Teletext
1
Select a TV channel or external input source
providing the Teletext programme.
2
Press m to display the Teletext.
13
14
3
Each time you press m, the screen switches
as shown below.
TELETEXT
TELETEXT
NOTE
• If you select a programme with no Teletext signal, "No
Teletext available." is displayed.
Button functions
Buttons
Description
CH (r/s)
Increase or decrease the page number.
You can select a group or block of pages
Colour (Red/
displayed in the coloured brackets at
Green/
Yellow/Blue)
the bottom of the screen by pressing
the corresponding Colour (Red/Green/
Yellow/Blue) on the remote control unit.
0 — 9
Directly select any page from 100 to 899
by using 0 — 9.
v (Top/
Switch the Teletext image to Top, Bottom
or Full.
Bottom/Full)
k (Reveal
To reveal hidden information such as an
hidden for
answer to a quiz.
TELETEXT)
3 (Hold)
To stop updating Teletext pages
automatically or release the hold mode.
[ (Subtitle
Display the subtitle during Teletext page.
for
• Subtitle will not be displayed when
the service does not contain subtitle
TELETEXT)
information.
1 (Subpage) Display the subpage during Teletext page.
PC compatibility chart
Horizontal
Vertical
Resolution
Frequency
Frequency
Standard
VGA
640 g 480
31.5 kHz
60 Hz
800 g 600
SVGA
37.9 kHz
60 Hz
1024 g 768
XGA
48.4 kHz
60 Hz
WXGA
1360 g 768
47.7 kHz
60 Hz
SXGA 1280 g 1024
64.0 kHz
60 Hz
SXGA + 1400 g 1050
65.3 kHz
60 Hz
1080P 1920 g 1080
67.5 kHz
60 Hz
: for LC-40M550M
Power Management is a registered trademark of Sun
Microsystems, Inc.
VGA and XGA are registered trademarks of International
Business Machines Corp.
VESA
–