Sharp Aquos LC-40LE530M Kullanım Kılavuzu - Sayfa 10
LCD TV Sharp Aquos LC-40LE530M için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Sharp Aquos LC-40LE530M 30 sayfaları. Lcd colour television
Sayfayı Yazdır
Part names
TV (Front)
TV (Rear)
14
15
16
6
7
8
9
10 11
* The HDMI1 and PC terminals can both use the same audio input terminal. However, the proper item must be selected in
the "PC audio select" menu. (See page 14.)
• The illustrations in this operation manual are for explanation purposes and may vary slightly from the actual operations.
• The illustrations used throughout this manual are based on LC-46LE530M.
Turning the TV on/off
Turning on/off the power
• To turn on the power
Press POWER on the TV. (After a few seconds, an image
appears with sound.)
• To turn off the power
Switch it off by pressing POWER on the TV.
NOTE
• If you are not going to use this TV for a long period of time, be sure to remove the AC cord from the AC outlet.
• Minor power is consumed when the unit is in standby mode.
8
POWER indicator
Remote control sensor
OPC sensor
17
18
13
12
SLEEP indicator
Light off
OPC indicator
Lighted (Red)
Lighted (Green)
1 POWER (On/Off) button
2 MENU button
1
3 INPUT button
4 Channel up ( r )/down ( s ) buttons
2
5 Volume up ( e )/down ( f ) buttons
6 HDMI 1 terminal*
3
7 HDMI 2 terminal
8 HDMI 3 terminal
4
9 RS-232C terminal
10 INPUT 4/INPUT 5 terminals
5
11 DIGITAL AUDIO OUTPUT terminal
12 INPUT 6 terminals
13 AUDIO OUT terminals
14 AUDIO IN (R/L) terminal
15 PC terminals*
16 Antenna input terminal
17 USB terminal
18 Headphone jack ( 3.5 mm)
• The speakers do not output volume
when headphones are plugged in.
Standby mode
• To standby mode
If the TV is switched on, you can switch it to standby by
pressing POWER on the remote control.
• Switching on from standby
From standby, press POWER on the remote control.
Power off
The TV is in standby
mode.
The TV is on.