Sharp Aquos LC-40LE540E Kullanım Kılavuzu - Sayfa 34
LCD TV Sharp Aquos LC-40LE540E için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Sharp Aquos LC-40LE540E 44 sayfaları. Lcd colour television
Sayfayı Yazdır
Network Setup
●
How to connect
1 Switch on your router before starting the network
installation.
2 Connect the AN-WUD630 USB adapter
separately) to the USB Wi-Fi port on the TV.
• Do not use a wireless LAN adapter other than the AN-
WUD630 Sharp wireless LAN adapter, as operations
cannot be guaranteed.
• If your wireless network is secured, have the
encryption key ready to enter on screen.
3 Go
to
"Settings"
"Network type".
4 Press OK and ▲/▼ to select "Wireless", and then
press OK.
The "Wireless" connection will be automatically selected
if the TV detects only the wireless USB adapter.
5 Select "Wireless setup".
There are three ways to connect by wireless the TV
to a network:
•
•
Easy setup
WPS functionallity required on Router/AP, in case
of router/access point does not support WPS go to
Assisted Setup explanation.
•
•
PBC (Push-Button)
1 Select WPS configuration
Press ▼ to select "PBC" and press OK.
2 Press ▼ to select Start scan and press OK.
3 Press the WPS button on the router/access point
(AP). Wait until the connection is established.
• If connection failed, please be sure WPS feature is
enabled (See the operation manual of your router/
access point(AP) for setup.)
•
•
PIN
If router/AP hasn't available the WPS Push-Button,
then PIN method should be selected.
1 Select WPS configuration
Select "PIN" and press OK.
2 Press ▼ to select Start Scan and press OK.
3 A list of available networks is displayed, select
the desired name (SSID) and press OK.
4 Enter the PIN number (8 digits) on the Router/
AP WPS PIN box. Follow the operation manual
of the router/access point(AP) instructions to
introduce the PIN number.
5 Press ▼ to select Next and press OK. Wait until
the connection is stablished.
32
sold
(
>"Network
settings">
and press OK.
and press OK.
•
•
Assisted setup
Shows the network name list (SSID).
1 Select the network you want to connect.
2 If network is protected, introduce the encryption
key using the software keyboard and press Green
button.
3 Select Done and press OK.
The TV will connects to the network you have
selected.
•
•
Manual setup
Allows you to establish the wireless connection
introducing all data manually.
•
•
Advanced Network Setup
Allows you to introduce manually all network setup.
•
•
Network Connection Test
Check the connection status.
NOTE
•
To connect your TV to the internet, you must have a
broadband internet connection.
•
If you do not have a broadband internet connection, consult
the store where you purchased your TV or ask your internet
service provider or telephone company.
•
There is no need to enter the security key for subsequent
connections to the wireless network.
•
If your access point is set to a stealth mode (Hidden SSID,
that prevents detection by other devices), you may not be
able to establish a connection. In this case, disable the
stealth mode on the access point.
•
To change wireless LAN connection settings, go to
"Settings" > "Network Settings".
•
Any low bandwidth adapter (router, hub, wireless access
point,...) will show poor network connection and then, poor
streaming quality. It's recommended 56 Mbps or higher
bandwidth for full feature.
•
Working close to other Wireless/Bluetooth network, can
appear some trouble using Wi-Fi adapter on the internet
conection TV. Due to wireless link cannot be guarantee,
please try to change Wi-Fi channel on Access Point (AP)
for avoiding interferences. Please refer to Access Point User
Manual.