Fiber Tronix FT-FOTR-1V-ST-S Kurulum Kılavuzu - Sayfa 3

Verici Fiber Tronix FT-FOTR-1V-ST-S için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. Fiber Tronix FT-FOTR-1V-ST-S 4 sayfaları. 1-channel digital simplex baseband video transmitter and receiver

Sayfayı Yazdır

INSTALLATION AND OPERATION

This symbol is intended to alert the user to the presence of important operating and
maintenance (servicing) instructions.
This symbol is intended to alert the user to the presence of "dangerous voltage" within the
product's enclosure that may be of sufficient magnitude to constitute a risk of electrical
shock.
CAUTION: To reduce the risk of electrical shock do not remove the cover or back of this
CAUTION: To prevent electric shocks and risk of fire hazards, do not use other than
1. UNPACKING and HANDLING
Each unit is shipped assembled and factory tested.
Ensure that all accessories are removed from the container before discarding packing material
2. MECHANICAL INSPECTION
Inspect the front and rear of the equipment for shipping damage. Make sure the equipment is
clean, and no connectors are broken, damaged, or loose. If equipment appears to be damaged
or defective please contact your distributor or Fibertronix at 1-610-429-1511 for assistance.
3. WIRING CONNECTIONS
a. Plug the included power supplies in a 120VAC outlet. Each power supply's DC output
adaptor connects respectively to the power input of the transmitter and receiver.
b. Connect the transmitter and receiver's optical connectors with an ST/PC patch cable.
The transmitter and receiver's Link Indicator Lights will indicate optical signals are
transmitted and received normally.
c. Connect the video source (e.g., camera) to the transmitter's video input port using
quality 75Ω coaxial cable with BNC connectors.
d. Connect the video monitor to the receiver's video output port using quality 75Ω coaxial
cable with BNC connectors.
e. When working normally, the transmitter's power indicator will be lighted green.
When working normally, the receiver's power indicator will be lighted yellow.
f.
g. Link
Indicator
transmitting/receiving.
h. Video
Indicator
transmitting/receiving.
i.
The Data Indicator Light is not used.
v1.0 4/5/11
unit. No user serviceable parts are inside.
specified power source.
LED
displays
whether
LED
displays
whether
3
the
optical
signals
the
video
signals
are
correctly
are
correctly