DIGISYNTHETIC DP45O Kullanıcı Kılavuzu - Sayfa 4

Amplifikatör DIGISYNTHETIC DP45O için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. DIGISYNTHETIC DP45O 13 sayfaları. Professional power amplifier

Sayfayı Yazdır

2 Introduction

2.1 Welcome

Thank you for choosing DIGISYNTHETIC CO.LTD professional audio product. You
have joined a growing group of audio professionals who have turned to
DIGISYNTHETIC for the most advanced audio amplification products available. So
welcome to the DIGISYNTHETIC family! All DIGISYNTHETIC products have been
designed, engineered and manufactured to meet the demands of even the most critical
sound reinforcement professional.
Please read this manual carefully. It contains important and helpful information to enable
you to get the DIGISYNTHETIC performance out of your new product. If you plan to use
this amplifier in either of the 2 available Mono modes, please refer to section 2.2

1.1 Unpacking

Please unpack and inspect your new amplifier for any damage that may have occurred
during transit. If damage is found, notify the Transportation Company immediately. Only
you, the consignee, may initiate a claim with the carrier for damage which occurred
during shipment. Remember to save all packing materials in the unlikely event your unit
should ever need to be returned to the factory for service of any kind.

3 Description

3.1 Features

□
Rugged, road-worthy professional power amplifier. E.I.A. Standard 19" (48.3cm) rack-
mountable chassis.
□
DP Series "
Logic Output
electrical stress on the output stages. This results in low distortion and high reliability.
□
Front panel power switch with turn-on delay for loudspeaker protection.
□
Patented Output Device Emulation Protection keeps the amplifier working under
extreme conditions.
□
High damping factor provides superior control over low frequency drivers for a clean,
accurate low end.
□
Safe with any load. Bridge-Mono and Parallel-Mono modes offer optimal load-
matching performance.
□
Complete protection against shorted outputs, mismatched loads, overheating, DC
input/output and high frequency overload, full internal fault protection.
□
Balanced XLR inputs with balanced direct XLR output. Optional barrier block input
connectors are available with the PM-BB accessories.
□
Efficient heat sinks and self-contained forced air cooling system, dissipate heat
quickly and evenly for extra amplifier protection and greater power output.
" circuitry generates large voltage swings while avoiding
Page 3