Sharp 14LT-45C Kullanım Kılavuzu - Sayfa 8
TV Sharp 14LT-45C için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Sharp 14LT-45C 25 sayfaları.
Ayrıca Sharp 14LT-45C için: Kullanım Kılavuzu (24 sayfalar), (Çekçe) Kullanım Kılavuzu (26 sayfalar)
Sayfayı Yazdır
Preparation
Place TV on a solid surface.
For ventilation, leave a space of at least 10 cm free all around
the set. To prevent any fault and unsafe situations, please do
not place any objects on top of the set.
Use this apparatus in tropical and moderate climates.
Features
Remote Control Colour Television.
100 UHF / VHF / Cable channel presets.
Cable Channel Compatible.
Menu Driven functions.
One Euro connector Socket.
Mono
Program custom name feature.
Automatic search tuning.
Sleep Timer.
Child lock.
Audio mute on no video signals.
Auto switch off after 5 minutes of no signal.
NTSC playback.
Before Switching on your TV
Power connection
Important: The TV set is designed to operate on 220-240V
AC, 50 Hz.
After unpacking, allow the TV set to reach the ambient
room temperature before you connect the set to the mains.
Aerial Connections
Connect the aerial plug to the aerial input socket located at
the back of the TV.
How to connect external equipment
See Connecting external equipment on page 14.
See the instruction manuals provided with the external de-
vices too.
Remote Control Battery Installation
Before using the TV set for the first time, install the supplied
dry batteries in the remote control.
1. With your thumb nail, pull up the slit as indicated by the
arrow to remove the battery cover.
Downloaded from:
http://www.usersmanualguide.com/
2. Insert two batteries 1.5 V (R03 AAA size). Be sure to
match the battery +/- terminals with the +/- marks inside
the compartment.
3. Replace the battery cover.
Notes:
Remove batteries if weak or if the unit is not in use for long
periods.
Do not mix old and new batteries.
Incorrect installation of the batteries may damage the re-
mote control.
Switching the TV ON/OFF
You can operate your TV both using the remote control
handset and onset buttons.
To switch the TV on
Your TV will switch on in two steps:
1- Press the power button located on the front of the TV.
Then the TV switches itself to standby mode and the RED
LED located below the TV turns on.
2- To switch on the TV from stand-by mode either:
Press a digit button on the remote control so that a pro-
gramme number is selected,
or,
Press Power button and
or -P/CH or P/CH+ buttons on the remote control respec-
tively, so the TV will switch on and the RED Led will turn
GREEN.
To switch the TV off
Press the stand-by button on the remote control, so the TV
will switch to stand-by mode and the GREEN LED will be-
come RED,
or,
Press the power button located on the front of the TV.
- 7 -
$ÃWÃ66 6ÃS"
CH or CH buttons on the TV