Sharp 21LF-90H Kullanım Kılavuzu - Sayfa 23

TV Sharp 21LF-90H için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Sharp 21LF-90H 34 sayfaları. Typical connections
Ayrıca Sharp 21LF-90H için: Bağlantı Kılavuzu (4 sayfalar), Kullanım Kılavuzu (34 sayfalar), Kullanım Kılavuzu (35 sayfalar), Hızlı Başlangıç Kılavuzu (4 sayfalar)

Sharp 21LF-90H Kullanım Kılavuzu
All manuals and user guides at all-guides.com
Connect a decoder with an aerial socket
to the TV
• Connect the aerial cable.
Connect a decoder without an aerial
socket to the TV
• Connect the decoder to your TV with a
eurocable (RCA Jack Cable) to
socket.
When your decoder has a Euro
connector / RCA Jack you can obtain better
picture quality if you connect a eurocable
(RCA Jack Cable) to
SCART socket.
TV and Video Recoder (VCR)
• Connect the aerial cables.
Better picture quality can be obtained if you
also connect a eurocable to
NTSC Playback
Connect NTSC VCR player through SCART
socket at the back of the TV or through RCA
Jack at the front of the TV.
Then, press “
(;7
“ button to select SCART or
F-AV.
Search for and store the test signal
of the video recorder
• Unplug the aerial cable from the aerial
socket “ANT” of your video recorder.
• Switch on your TV and put the video recorder
on the test signal. (See the handbook for
your video recorder.)
• Enter the Tuning menu via the Install menu.
• Search for the test signal of your video re-
corder in the same way as you searched for
and stored the TV signals. See Tuning,
Search and Store TV channels. Store the
test signal under programme number 0.
• Replace the aerial cable in the aerial socket
“ANT” of your video recorder once you have
stored the test signal.
ENG-2163-1548 UK-PAL-TEK SCART-FAV-STEREO-SHARP-AK44-TV2.p65
Camera and Camcorder
To connect to Front-AV input
Connect your camera or camcorder at the
front side of your TV.
• Connect your equipment to the TV via VIDEO
(yellow), AUDIO R (red) and AUDIO L (white)
SCART
inputs. You should connect the jacks to the
input in the same colour.
Connect the decoder to the video
recorder
Some video recorders have a special
euroconnector for decoder.
• Connect a eurocable to the euroconnector of
your decoder and to the special eurocon-
SCART socket.
nector of your video recorder. See also the
handbook of your video recorder.
• To connect your video recorder to the TV, see
TV and Video Recorder section.
If you want to connect more equipment to
your TV, consult your dealer.

Connecting Headphones

Use the stereo headphone socket (HP) on
the lower front / right side of your TV, to con-
nect headphones.
- 22 -
22
(F- AV)
:
06.01.2004, 15:37