Sharp AQUOS CD-BA250 Kullanım Kılavuzu - Sayfa 12
Stereo sistemi Sharp AQUOS CD-BA250 için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Sharp AQUOS CD-BA250 36 sayfaları. Led backlight tv
Ayrıca Sharp AQUOS CD-BA250 için: Kullanım Kılavuzu (32 sayfalar), Hızlı Kılavuz (4 sayfalar)
Sayfayı Yazdır
Programme setup (Continued)
H Programme edit
Use this menu to set up a channel individually.
1
Repeat steps 1 to 3 in Auto search.
Press a /b to select "Programme edit", and then
2
press ENTER.
Press a /b to select the channel you want to
3
edit, and then press 1 to 5 on the remote control if
necessary or press RETURN to exit.
• As you toggle down the channels, each channel is
immediately reflected in the background when you press
ENTER.
(Erase programme)
1
Channels can be erased individually.
Press 1 to erase the selected channel.
(Label)
2
When a TV channel sends its network name, the "Auto
installation" detects the information and assigns a name to
it. However, you can change channel names individually.
Maximum 5 alphanumerics can be input.
Press 2 to start labelling.
Press a /b/ c / d to select a character, and then press 2
again or ENTER to save.
(Sort)
3
Channel positions can be sorted freely.
Press 3 to select the channel you want to move.
Press a/b to move it to the desired position, and then
press 3 again or ENTER to save.
(Skip)
4
Channels with "Skip" set to "On" are passed over when
using CHr/s even if selected while watching the image
from the TV.
Press 4 to skip the selected channel.
Press 4 again to cancel the skip.
(Lock)
5
You can block the viewing of any selected channel.
Password must be set first to allow "
• See page 12 for setting a password.
Press 5 to lock the selected channel.
Press 5 again to unlock the locked channel.
10
Selecting a preset AV mode
"AV mode" gives you several viewing options to choose
from to best match the system environment, which
can vary due to factors like room-brightness, type of
programme watched or the type of image input from
external equipment.
1
2
3
Selected item
STANDARD
MOVIE
PC
DYNAMIC
DYNAMIC
(FIXED)
NOTE
• You can select a different AV mode item for each input mode.
(For example, select STANDARD for TV input and DYNAMIC
for VIDEO input.)
Menu operation
1
2
3
" to function.
4
Press MENU and the MENU screen displays.
Press c/d to select "
"
" (Audio).
Press a/b to select "AV mode", and then press
ENTER.
For a highly defined image in a normally
bright room.
For a movie.
For PC (Available only when inputting an
HDMI or PC signal).
For a clear-cut image emphasising high
contrast for sports viewing.
Changes the image and sound settings
to the factory preset values. No
adjustments are allowed.
Press MENU and the MENU screen displays.
Press c/d to select the desired menu
(Programme setup, Picture, Audio, ECO, Setup,
Option).
Press a/b to select the desired menu item.
Press ENTER to proceed if necessary.
Press a/b or c/d to select the desired item or
adjust the item to the desired level. Press ENTER
if necessary.
" (Picture) and
Description