Sharp CD-80W Kullanım Kılavuzu - Sayfa 11

Stereo sistemi Sharp CD-80W için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Sharp CD-80W 28 sayfaları.

Sayfayı Yazdır

(Continued)

(Main unit operation)

2 "AA" size batteries (UM/SUM-3, R6, HP-7 or

similar)

When the AC power lead is first connected, the unit will enter

the demonstration mode.

To cancel the demonstration mode:

When the unit is in the stand-by mode (demonstration mode),

press the X-BASS/DEMO button.

The demonstration mode will be cancelled and the display will

disappear.

To return to the demonstration mode:

When the unit is in the stand-by mode, press the X-BASS/DEMO

button again.

Note:

When the power is on, the X-BASS/DEMO button can be used

to select the extra bass mode.

Press the DIMMER button.

The display will be made dimmer.

To return to the original brightness:

Press the DIMMER button again.

When bright

When dark

When inserting or removing the batteries, push them towards

the

Installing the batteries incorrectly may cause the unit to mal-

function.

Precautions for battery use:

Insert the batteries according to the direction indicated in the

battery compartment.

Replace all old batteries with new ones at the same time.

Do not mix old and new batteries.

Remove the batteries if they are weak or if the unit will not be

used for long periods of time. This will prevent potential dam-

age due to battery leakage.

Caution:

Do not use rechargeable batteries (nickel-cadmium battery, etc.).

0.2 m - 6 m

(8" - 20')

Notes concerning use:

Replace the batteries if the operating distance is reduced or if

the operation becomes erratic.

Periodically clean the transmitter LED on the remote control

and the sensor on the main unit with a soft cloth.

Exposing the sensor on the main unit to strong light may in-

terfere with operation. Change the lighting or the direction of

the unit.

Keep the remote control away from moisture, excessive heat,

shock, and vibrations.

E-10

Demo mode

To change the brightness of the display

Remote control

battery terminals.