Sharp CD-BA200 Kullanım Kılavuzu - Sayfa 11

Stereo sistemi Sharp CD-BA200 için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Sharp CD-BA200 18 sayfaları. Sharp mini component system operation manual cd-ba200
Ayrıca Sharp CD-BA200 için: Hızlı Kılavuz (2 sayfalar)

Sayfayı Yazdır
Sharp CD-BA200 Kullanım Kılavuzu
(Continued)
Selected disc number
Selected track number
2
3
1
3
CLEAR
2
Repeat play indicator
Playback order
1
5
5
CD
APMS
(Automatic Programmable Music Selector)
You can playback the tracks on the CDs in the disc 1 - 3 positions
in any order desired. By specifying the disc numbers from 1 to
3, and the track numbers from 1 to 99, you can choose up to
32 selections for playback in the order you like.
1
When in the stop mode, use the disc number buttons (
-
3) to select the desired disc number.
2
Press the
or
5
4
3
Press the MEMORY/SET (MEMORY) button.
"MEMORY" will appear to show that the programmed se-
quence is being entered into memory.
4
Repeat steps 1 - 3 for any other track. Up to 32 tracks can
be programmed.
If you make a mistake while in the programming mode
("MEMORY" will appear) or if you wish to change your selec-
tions, the programmed tracks can be cleared by pressing the
CLEAR button. The tracks will be cleared sequentially, starting
with the last track entered.
5
Press the
(
) button to start playback of programmed
0/R
0R
selections.
To clear the programmed selections:
Press the CLEAR button on the remote control while the disc is
stopped.
Each time the button is pressed, one track will be cleared,
beginning with the last track programmed.
Notes:
Opening the disc tray automatically cancels the programmed
sequence.
Even if you press the ON/STAND-BY button to enter the
stand-by mode or the function is changed from CD to some
other function, the programmed selections will not be cleared.
During APMS operation, random play is not possible.
Repeat play
All tracks on up to 3 discs, or a programmed sequence can be
continuously repeated.
To repeat all tracks on up to 3 discs:
Press the
(
) button twice.
0/R
0R
"
" will appear.
R
To repeat a programmed sequence:
1
Program a sequence of up to 32 tracks.
2
Press the
(
) button twice.
0/R
0R
"
" will appear.
R
To cancel repeat play:
Press the
(
) button again.
0/R
0R
"
" will go out.
R
Note:
When using repeat play, be sure to press the
after you are through listening.
Otherwise, the CD(s) will play continuously.
10
button to select the desired track.
1
(CD
) button