Sharp CD-DK890N Kullanım Kılavuzu - Sayfa 30

Stereo sistemi Sharp CD-DK890N için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Sharp CD-DK890N 44 sayfaları. Mini component system
Ayrıca Sharp CD-DK890N için: Hızlı Başlangıç Kılavuzu (2 sayfalar)

Sayfayı Yazdır
Sharp CD-DK890N Kullanım Kılavuzu

Listening to the radio

CD-DK890N
POWER
ON/ STAND-BY
TUNER
(BAND)
TUNING
Auto power on function:
When you press any of the following buttons, the unit turns on.
TUNER (BAND) button (main unit and remote control): The unit
turns on and the "TUNER" function is activated.
/
button on the main unit: The unit turns on and playback of
the last function starts (CD, TAPE, TUNER, AUDIO IN, iPod).
30
5
4
3
2
1
TIMER
CD
5
4
3
2
1
PLAYBACK (PLAY & STOP)
RECORD/PLAYBACK
AUDIO
PHONES
IN
Tuning
1
Press the ON/STAND-BY button to turn the power on.
2
Press the TUNER (BAND) button repeatedly to select the
desired frequency band (FM or AM).
3
Press the TUNING (
station.
Manual tuning:
Press the TUNING (
to tune in to the desired station.
Auto tuning:
TUNING
When the TUNING (
seconds, scanning will start automatically and the tuner will
stop at the first receivable broadcast station.
Notes:
When radio interference occurs, auto scan tuning may stop
automatically at that point.
Auto scan tuning will skip weak signal stations.
To stop the auto tuning, press the TUNING (
To receive an FM stereo transmission:
Press the TUNER (BAND) button to display the "ST" indicator.
" " will appear when an FM broadcast is in stereo.
If the FM reception is weak, press the TUNER (BAND) button to
extinguish the "ST" indicator. The reception changes to monaural,
and the sound becomes clearer.
or
) button to tune in to the desired
or
) button as many times as required
or
) button is pressed for more than 0.5
or
) button again.
FM stereo mode indicator
FM stereo receiving indicator