Sharp CD-DP900E Kullanım Kılavuzu - Sayfa 23

Stereo sistemi Sharp CD-DP900E için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Sharp CD-DP900E 32 sayfaları. Mini component system
Ayrıca Sharp CD-DP900E için: Hızlı Kılavuz (4 sayfalar)

Sayfayı Yazdır
Sharp CD-DP900E Kullanım Kılavuzu

Recording from the radio

1
Tune in to the desired station. (See page 19.)
2
Load a cassette into the TAPE 2 cassette compartment with the
side to be recorded on facing you.
Wind past the leader of the tape, on which recording cannot be performed.
3
Press the REC PAUSE (
) button.
Recording will be paused.
4
Press the
/
(TAPE 2
) button to
start recording.
To interrupt recording:
Press the REC PAUSE (
) button.
To resume recording, press the
/
(TAPE 2
To stop recording:
Press the
(TAPE ) button.
Note:
If you hear a whistling noise whilst recording an AM station, move the AM loop aerial.
Erase-prevention tab of cassette tapes:
When recording on a cassette tape, make
sure that the erase-prevention tabs are not re-
moved. Cassettes have removable tabs that
prevent accidental recording or erasing.
To protect the recorded sound, remove the tab
after recording. Cover the tab hole with adhe-
sive tape to record on the tape without the tab.

Dubbing from tape to tape

You can record from TAPE 1 to TAPE 2.
1
2
3
4
) button.
5
To stop dubbing:
Side A
Press the
TAPE 1 and TAPE 2 will simultaneously stop.

Erasing recorded tapes

Tab for side B
Tab for side A
1
2
3
4
Note:
Make sure that the TAPE 1 is not in use.
Press the ON/STAND-BY button to turn the power on.
Load a prerecorded cassette into the
TAPE 1 cassette compartment. Insert
a blank tape into the TAPE 2 cassette
compartment.
It is recommended that the recording tape is
the same length as the master tape.
Press the TAPE (1
2) button until
"TAPE 1" appears on the display.
Press the REC PAUSE (
) button.
Recording will be paused.
Press the
/
(TAPE 2
) button to
start dubbing.
(TAPE ) button.
Load the tape to be erased into the TAPE 2 cassette compartment with the side to
be erased facing toward you.
Press the TAPE (1
2) button until "TAPE 2" appears on the display.
Press the REC PAUSE (
) button.
Press the
/
(TAPE 2
) button to start erasing.
02/1/8
CD-DP900E(UK)_2.fm
CD-DP900E
23
Tuning (See page 19.)