Sharp CD-E250E Kullanım Kılavuzu - Sayfa 16

Stereo sistemi Sharp CD-E250E için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Sharp CD-E250E 32 sayfaları. Mini component system
Ayrıca Sharp CD-E250E için: Kullanım Kılavuzu (32 sayfalar)

Sayfayı Yazdır

1. Specifications

Listening to a CD (CDs) (continued)

CD-E250E

To interrupt playback:

Press the

button on the remote control.

To resume playback from the same point, press the

To stop playback:

Press the

button.

To remove the CDs:

Whilst in the stop mode, press the OPEN/CLOSE

The disc tray will open. Remove the two discs. Then, press the

DISC SKIP button to rotate the disc tray and remove the remaining

disc.

Caution:

! Do not place two CDs in one disc tray.

! Do not play discs with special shapes (heart- or octagon-

shaped). It may cause malfunctions.

! Do not push the disc tray whilst it is moving.

! Do not turn the disc tray by hand. This may cause malfunctions.

! If the power fails whilst the tray is open, wait until the power is

restored.

! If the disc tray is stopped with force, the unit will not function. If

this occurs, press the ON/STAND-BY button to enter the power

stand-by mode and then turn the power on again.

! If TV or radio interference occurs during CD operation, move the

unit away from the TV or radio.

! If a disc is damaged, dirty, or loaded upside down, the disc will

skip or not play back.

" To locate the beginning of a track

To move to the beginning of the next track:

button.

Press the

button for less than 0.5 seconds during playback.

To restart the track being played:

Press the

button for less than 0.5 seconds during playback.

Notes:

button.

! You can locate the beginning of a track on one disc only.

! You can skip to any track by pressing the

repeatedly until the desired track number appears.

" To locate the desired portion

For audible fast forward:

Press and hold down the

For audible fast reverse:

Press and hold down the

Notes:

! Normal playback will resume when the

released.

! You can locate the desired portion on one disc only.

! When the end of the last track is reached during fast forward,

"END" will appear on the display and CD operation will be

paused. When the beginning of the first track is reached during

fast reverse, the unit will enter the playback mode.

03/2/17

CD-E250E(E)2.fm

button

button during playback.

button is