Sharp CD-E250E Kullanım Kılavuzu - Sayfa 26
Stereo sistemi Sharp CD-E250E için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Sharp CD-E250E 32 sayfaları. Mini component system
Ayrıca Sharp CD-E250E için: Kullanım Kılavuzu (32 sayfalar)
Sayfayı Yazdır
Timer and sleep operation (continued)
CD-E250E
! Sleep operation
1
Play back the desired sound source.
2
Press the TIMER/SLEEP button repeatedly until "SLEEP" is
displayed and then within 8 seconds, press the MEMORY/
SET button.
To change the sleep time:
Whilst the sleep time is displayed, press the TUNING/TIME (
or
) button.
(Maximum: 3 hours - Minimum: 5 minutes)
3:00
2:00
(cancel)
0:05
3
Within 30 seconds, press the MEMORY/SET button.
4
Your system will enter the power stand-by mode automat-
ically after the preset time has elapsed.
The volume will turn down 30 seconds before the sleep opera-
tion finishes.
To cancel the sleep operation:
Press the ON/STAND-BY button whilst the sleep timer is set.
To confirm the remaining sleep time:
Press the TIMER/SLEEP button whilst the sleep timer is set.
The remaining sleep time is displayed for about 8 seconds.
26
! To use timer and sleep operation together
Example: To fall asleep and wake up to the same radio station
You can play back the same source only (the function cannot be
switched).
1
2
Sleep timer setting
1:30
1:00
Caution:
0:10
0:15
0:30
When using the cassette deck, be sure the tape length is long
enough to perform both functions. If you want to sleep and wake up
listening to a tape, and the length of the tape is shorter than the
sleep timer setting, timer playback will not be possible.
Set the sleep time (see left, steps 1 - 3).
Whilst the sleep timer is set, set the desired playback time
(steps 4 - 6, pages 24 - 25).
Timer playback setting
5 minutes - 3 hours
Sleep operation will
automatically stop.
03/2/17
CD-E250E(E)3.fm
Timer playback
start time